■
Programming an entry gate (for U.S.A. owners)/Programming a
devices in the Canadian market
1
Place the remote control transmitter 1 to 3 in. (25 to 75 mm)
away from the HomeLink
Keep the HomeLink
2
Press and hold the selected HomeLink
3
Repeatedly press and release (cycle) the remote control trans-
mitter for 2 seconds each until step 4 is completed.
4
When the HomeLink
release the buttons.
5
Test the HomeLink
grammed button. Check to see if the gate/device operates cor-
rectly.
6
Repeat the steps above to program another device for any of the
remaining HomeLink
■
Programming other devices
To program other devices such as home security systems, home
door locks and lighting, contact your Toyota dealer for assistance.
■
Reprogramming a button
The individual HomeLink
reprogrammed. To reprogram a button, follow the "Reprogramming
a HomeLink
Operating HomeLink
Press the appropriate HomeLink
light should come on.
The HomeLink
signal for up to 20 seconds as long as the button is pressed.
PRIUS v_OM_OM47B12U_(U)
6-4. Using the other interior features
®
buttons.
®
indicator light in view while programming.
®
indicator light starts to flash rapidly,
®
operation by pressing the newly pro-
®
buttons.
®
buttons cannot be erased but can be
®
button" instructions.
®
®
®
compatible transceiver in your vehicle continues to send a
®
button.
button. The HomeLink
395
6
®
indicator