Table of Contents
Advertisement
234
4-5. Using the driving support systems
NOTICE
■
To prevent damage to or incorrect operation of the LDA
Observe the following to ensure that the LDA system functions correctly
●
Do not modify the headlights or attach stickers to the surface of the lights.
●
Do not modify the suspension. When performing a replacement, contact
your Toyota dealer.
●
Do not install or place anything on the hood or the grille. Also, do not install
a grille guard (bull bars, kangaroo bar, etc.).
●
If your windshield needs repairs, contact your Toyota dealer.
■
Camera sensor
Observe the following to ensure that the LDA system functions correctly
●
Keep the windshield clean at all times.
Performance could be affected if the windshield is dirty, or if raindrops,
condensation or ice are adhering to the windshield.
●
Do not attach a sticker or other items to
the windshield near the camera sensor.
●
Do not spill liquids onto the camera sensor.
●
Do not attach window tinting to the windshield.
●
Do not install an antenna in front of the camera lens.
●
If the windshield area in front of the camera sensor is fogged up, use the
windshield defogger to remove the fog from that area. (P. 366)
When it is cold, using the heater with air blowing to the feet may allow the
upper part of the windshield to fog up. This will have a negative effect on
the images.
●
Do not scratch the camera lens, or let it get dirty.
When cleaning the inside of the windshield, be careful not to get any glass
cleaner, etc., on the lens. Also, do not touch the lens.
For lens repair, contact your Toyota dealer.
●
Do not change the installation position or direction of the camera sensor or
remove it.
The direction of the camera sensor is precisely adjusted.
●
Do not subject the camera sensor to strong impact or force, and do not
disassemble the camera sensor.
●
When replacing the windshield, contact your Toyota dealer.
PRIUS v_OM_OM47B12U_(U)
Advertisement
Table of Contents
Troubleshooting
