Toyota HIGHLANDER HYBRID 2007 Manual page 76

3. Pull the seatback angle adjusting le-
ver up to unlock and push down the
seatback.
When returning the seatback to the up-
right position, be careful not to make
yourself hit by the seatback which will
bound with considerable spring force.
After returning the seat to its original
position, be certain to replace the head
restraint.
64
'07 HIGHLANDER HV_U (L/O 0608)
CAUTION
D
Do not allow passengers to ride on
the flattened seat while driving; use
the seat in the normal position.
D
After returning the seat to its origi-
nal position, try pushing the seat
and seatback forward and rearward
to make sure it is secured in place.
Be certain to replace head restraint.
Flattening seatbacks
(power seat)
To flatten the seatbacks, do the follow-
ing:
1. Hold the center of the lever and pull
it up, sliding the second seat to the
rear−most position. Then pull the
seat forward slightly until it locks.
2007 HIGHLANDER HV from July '06 Prod. (OM48685U)