Service Specifications - Toyota HIGHLANDER HYBRID 2007 Manual

Service specifications

ENGINE
Valve clearance (engine cold), mm (in.):
Intake 0.15—0.25 (0.006—0.010)
Exhaust 0.25—0.35 (0.010—0.014)
Spark plug type:
DENSO SK20R11
NGK IFR6A11
Spark plug gap, mm(in.):
1.1 (0.043)
ENGINE LUBRICATION
Oil capacity (drain and refill), L (qt., Imp.
qt.):
With filter 4.7 (5.0, 4.1)
Without filter 4.5 (4.8, 4.0)
"Toyota Genuine Motor Oil" is used in
your Toyota vehicle. Use Toyota approved
"Toyota Genuine Motor Oil" or equivalent
to satisfy the following grade
viscosity.
Oil grade:
ILSAC multigrade engine oil
412
'07 HIGHLANDER HV_U (L/O 0608)
Recommended oil viscosity:
SAE 5W−30
Outside temperature
Please contact your Toyota dealer for fur-
ther details.
and
COOLING SYSTEM
Total capacity, L (qt., Imp. qt.):
Gasoline engine coolant
With rear heater
Without rear heater
Inverter coolant
Coolant type:
"Toyota Super Long Life Coolant" is
used in your Toyota vehicle at factory
fill. In order to avoid technical problems,
only use "Toyota Super
Coolant" or similar high quality ethylene
glycol based non−silicate, non−amine,
non−nitrite, and non−borate coolant with
long−life hybrid organic acid technology.
(Coolant with long−life hybrid organic
acid technology is a combination of low
phosphates and organic acids.)
Do not use plain water alone.
Please contact your Toyota dealer for
further details.
2007 HIGHLANDER HV from July '06 Prod. (OM48685U)
11.6 (12.3, 10.2)
10.3 (10.9, 9.0)
3.4 (3.6, 3.0)
Long Life