Toro 72027 Operator's Manual page 11

1. Read the instructions before servicing or performing
maintenance to the machine.
2. Time interval
3. Check the engine-oil level.
4. Check the coolant level; refer to the Operator's Manual for
further instructions.
5. Check the tire pressure (2 locations).
6. Check hydraulic-fluid level; refer to the Operator's Manual
for further instructions.
126-9351
1. Chassis (15 A)
2. Accessory (15 A)
127-0326
1. Read the Operator's
Manual.
2. Height of cut
decal126-9351
3. Main (25 A)
4. Power point (15 A)
decal127-0326
3. Remove the key and
read the Operator's
Manual before performing
maintenance.
126-9279
7. Check the jackshaft-fluid level.
8. Grease the deck-drive PTO; refer to the Operator's Manual
for further instructions.
9. Check the air cleaner.
10. Grease the idler pivot; refer to the Operator's Manual for
further instructions
11. Grease the front caster wheel bearings (2 locations); refer to
the Operator's Manual for further instructions.
12. Grease the front caster pivots (2 locations); refer to the
Operator's Manual for further instructions.
1. Read the Operator's Manual. (A) Short, light grass; dry
conditions; maximum dispersion; (B) Bagging setting; (C)
Tall, dense grass; wet conditions; maximum ground speed
11
131-1180
decal126-9279
decal131-1180