8.2 Removing the filter
If you want to use the appliance without the filter, you must
remove it and notify the appliance of its removal.
1. Extract the water tank and exhausted filter;
2. See instructions in section "10. Settings menu" to set the
machine.
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the filter even if the
message has not yet been displayed.
10. SETTINGS MENU
When in the menu, use the active buttons to select the corresponding functions:
Water softener
filter
Coffee
temperature
Energy saving
(*)
Beverages differ according to model
1. Access the menu:
2. Adjust the machine settings:
Access to
settings menu
1
2
3
9. TIPS FOR ENERGY SAVING
•
To reduce energy consumption, after delivering one or
more beverages, remove the milk container.
•
Set auto-off to 15 minutes (see "10. Settings menu");
•
Enable Energy Saving (see "10. Settings menu");
•
Always carry out the descaling cycle when prompted by
the machine.
Selection of
Beep
settings
(*)
4
5
6
Press and hold the
the settings buttons light up.
Proceed by pressing the button for the setting to be adjusted.
22
Auto-off
7
Water hardness
button for a few seconds:
→