Table of Contents
Advertisement
Lift the cage and align the screw
holes.
Ceiling Bracket
Downrod
Installing the Pull Chains
Feed the pull chains from the fan switch
and the light switch down through the
holes in the light kit assembly as shown.
Attach the pull chain pendants to the light
and fan pull chains.
Repeat x2
Installing the Glass and Light Fixture Cage
Notch
Lift the globe and align the
notches in the globe with
the tabs in the light kit.
Make sure the cage is securely attached
to the light kit assembly. Failure to
properly secure all three cage screws
could result in the cage falling.
Hanging Fan
Wiring
The fan pull chain controls
the speed: from high to off.
Tab
Cage
Washers
Cage
Screws
IMPORTANT
Canopy
Blades
Hood
The light pull chain controls
the light fixture: on and off.
Attach the globe by lifting and
turning clockwise one third of a
full turn of the glass until it stops.
NOTE: Check to ensure
proper engagement.
WARNING
GLASS FALL HAZARD
To prevent SERIOUS INJURY or DEATH, make
sure that glass is properly secured.
bag
Install all three cage screws with
the cage washers and tighten all
three screws securely.
Light Fixture
Pull Chains
1886
3 of 3
Cage Screw
3 of 3
Cage Washer
ON
10
Glass/Cage
Advertisement
Table of Contents
