Panasonic AW-UE80KP Operating Instructions Manual page 68

4k integrated camera
Hide thumbs Also See for AW-UE80KP:
Table of Contents

Advertisement

Operating Instructions
Troubleshooting (continued)
Symptom
The images are distorted
When multiple web browsers
are running to display H.264
images, images from multiple
cameras appear sequentially
in a single web browser
Audio is not output for
NDI|HX-compatible switchers
Images stop in applications
that support High bandwidth
NDI
68
Cause and solution
• The images may be distorted if the transmission path is congested
and proper transmission is not possible.
→ Consult your network administrator.
• The images may be distorted if video packet shuffling occurs on the
transmission path.
→ Switching to an identical Internet service provider for both the camera
and the personal computer may prevent this problem. Consult your
network administrator.
For Windows:
• This may occur depending on the combination of the personal
computer's display adaptor and the driver.
→ If this occurs, update the first display adaptor to the latest version.
If this does not resolve the problem, adjust the hardware accelerator
function as follows.
This section describes the procedure for Windows 10 as an example.
Changing the settings may not be possible, depending on your
environment.
A Right-click on the desktop, and select [Display settings] from the
menu.
B Click [Advanced display settings].
C Select the [Troubleshooting] tab, and click [Change Settings].
D Change to [Hardware acceleration] setting to [disable] at the far left,
and click [OK].
• [Audio] may be set to [Off] in the [Audio] audio setting screen.
→ Reset the setting to [On].
• When a personal computer and this unit are connected via a
commercially available USB LAN conversion adaptor, the images may
stop due to network problems on the personal computer side.
→ If this phenomena occurs, firstly disable the network adaptor that is
connecting the personal computer to this unit, then change [Streaming
mode] in [Video over IP] to [H.264]. After this, re-enable the network
adaptor that you disabled and the images will be output when you
change the [Streaming mode] to [High bandwidth NDI].
Reference pages
– – –
– – –
– – –
Operating Instructions (PDF)
→ "Web screen configurations"
→ "Image screen [Image/Audio]"
→ "Audio setting screen [Audio]"
→ "Audio"
→ "Audio"
Operating Instructions (PDF)
→ "Web screen configurations"
→ "Image screen [Image/Audio]"
→ "IP video settings screen [Video over
IP]"
→ "Streaming mode"

Advertisement

Table of Contents
loading

Table of Contents