Editing Locations; Deleting A Location; Projecting A Location; Courses - Garmin EDGE 840 Owner's Manual

Editing Locations

1 Select Navigation > Saved Locations.
2 Select a location.
3 Select the information bar at the top of the screen.
4 Select .
5 Select an attribute.
For example, select Change Elevation to enter a known altitude for the location.
6 Enter the new information, and select

Deleting a Location

1 Select Navigation > Saved Locations.
2 Select a location.
3 Select the location information at the top of the screen.
4 Select > Delete Location >

Projecting a Location

You can create a new location by projecting the distance and bearing from a marked location to a new location.
1 Select Navigation > Saved Locations.
2 Select a location.
3 Select the location information at the top of the screen.
4 Select > Project Location.
5 Enter the bearing and distance to the projected location.
6 Select .

Courses

You can send a course from your Garmin Connect account to your device. After it is saved to your device, you
can navigate the course on your device. You can also create a custom course on your device.
You can follow a saved course simply because it is a good route. For example, you can save and follow a
bike friendly commute to work. You can also follow a saved course, trying to match or exceed previously set
performance goals.
28
.
.
Navigation