Ending A Call; Ending A Call With Audio-Only Participants - Polycom VSX3000 Getting Started Manual

Ending a Call

Ending a Call with Audio-only Participants

© Polycom, Inc.
U
SING THE
To end a call using a VSX system integrated with a SoundStation VTX 1000
:
conference phone
From the conference phone:
Press the END VIDEO soft key on the phone.
If the conference is a point-to-point video call, it will end immediately.
If the conference is a multi-point video call, the VSX Hang Up screen
appears on the monitor. In this case, select which site(s) to
disconnect.
From the VSX system:
1. Press Hang Up on the VSX remote control.
2. On the VSX Hang Up screen, do one of the following:
Select which site to disconnect.
Choose Hang Up All to end the call for all sites.
Your conference may include a mix of video participants and audio-only
participants. If an audio-only participant hangs up during the call, you need to
disconnect the call from the conference. This is the same as hanging up a
telephone receiver in a regular phone call.
To disconnect the audio-only call:
1. Press Hang Up on the remote control.
2. If the call is a multipoint call, select VTX Conference Phone from the
Hang Up screen to clear the audio line.
Even if you hang up the video call or the audio-only site hangs up, you still need to hang
up the audio-only call from your system. If you do not disconnect the audio-only call
from the VSX system, you will hear a tone from the telephone through the conference.
S S VTX 1000 C
OUND TATION
P V
ONFERENCE HONE IN IDEO
C
ALLS
35