Table of Contents
Advertisement
30/ENGINE - WORK ON INDIVIDUAL PARTS
Dismantling centrifugal clutch
16.8
Assembling centrifugal clutch
16.9
Condition
Centrifugal clutch removed.
–
Loosen screws
Mortise key (45229021000) (
300513-10
Clutch spring with green mark
–
Remove screw
Info
Washer
not have to be fitted.
All clutch springs must be marked with the same color.
–
Remove clutch shoe
–
Repeat these steps on the other clutch shoes.
300514-10
Clutch spring with yellow mark
–
Remove screw
Info
Washer
not have to be fitted.
All clutch springs must be marked with the same color.
–
Remove clutch shoe
–
Repeat these steps on the other clutch shoes.
301866-10
Condition
Centrifugal clutch removed.
Clutch spring with green mark
–
Position the clutch shoe
–
Fit screw
Info
Washer
be fitted consistently on all clutch shoes depending on the clutch
engagement speed.
All clutch springs must be marked with the same color.
300514-11
–
Repeat these steps on the other clutch shoes.
Clutch spring with yellow mark
–
Position the clutch shoe
–
Fit screw
Info
Washer
be fitted consistently on all clutch shoes depending on the clutch
engagement speed.
All clutch springs must be marked with the same color.
301866-11
–
Repeat these steps on the other clutch shoes.
with special tool.
p. 143)
with spacing washer
is used for adjusting the clutch engagement speed and does
.
with spacing washers
is used for adjusting the clutch engagement speed and does
.
.
with spacing washer
and spring
is used for adjusting the clutch engagement speed and must
.
with spacing washers
and spring
is used for adjusting the clutch engagement speed and must
and spring
.
and spring
.
.
.
80
Advertisement
Table of Contents
