Schedules; Modifying Schedule Periods - Trane Pivot Smart User Manual

Schedules

Tap M M e e n n u u > > S S c c h h e e d d u u l l e e s s to view or edit the schedule. If the schedule is
disabled, it will not be displayed.
N N o o t t e e : : Schedules must be enabled for this screen to be shown.
Feature
Current Day
Start and Stop time
adjust
Add
Delete
Enable/Disable
Schedule

Modifying Schedule Periods

1. Access the existing schedule. Tap on the preferred period (see
p. 19).
2. Tap on the U U p p / / D D o o w w n n arrows to adjust the start and stop times.
18
Displays each day of the week.
Tap the Up/Down arrows to adjust the schedule start and stop
time. The top set of arrows adjusts the start time; the bottom set of
arrows adjusts the stop time.
Tap to add a new period into the system.
Tap to delete a period from the system.
Tap to either enable or disable schedules. When the schedule is
disabled, tap the building icon on the Home screen to move back
and forth between the occupied setpoints and unoccupied
setpoints. The thermostat will not follow the schedule.
Description
Figure 3,
BAS-SVU044D-EN