3.9
System connector
3.9.1 Process tools
•
Tweezers.
3.9.2 Instructions
•
Dismount the phone as described in 1 Disassembly, step 1-7
1. Remove the system connector from the board (fig 1).
2. Mount a new system connector. Make sure that the connector not is turned the wrong way!
NOTE!
•
Mount the phone as described in 2 Reassemble, step 1-10.
3/00021-1/FEA209 544/18 F
Make sure that the boards contact surfaces are not dirty or oxidised. If necessary,
use alcohol and a brush to clean it.
Fig 1
Mechanical Working Instructions
15(21)