Table of Contents
Advertisement
6-3. Do-it-yourself maintenance
650
After a fuse is replaced
■
If the lights do not turn on even after the fuse has been replaced, a bulb may
●
need replacement. (P. 651)
If the replaced fuse blows again, have the vehicle inspected by any autho-
●
rized Toyota retailer or Toyota authorized repairer, or any reliable repairer.
If there is an overload in a circuit
■
The fuses are designed to blow, protecting the wiring harness from damage.
When replacing light bulbs
■
Toyota recommends that you use genuine Toyota products designed for this
vehicle. Because certain bulbs are connected to circuits designed to prevent
overload, non-genuine parts or parts not designed for this vehicle may be
unusable.
WARNING
To prevent system breakdowns and vehicle fire
■
Observe the following precautions.
Failure to do so may cause damage to the vehicle, and possibly a fire or
injury.
Never use a fuse of a higher amperage rating than that indicated, or use
●
any other object in place of a fuse.
Always use a genuine Toyota fuse or equivalent.
●
Never replace a fuse with a wire, even as a temporary fix.
Do not modify the fuses or fuse boxes.
●
NOTICE
Before replacing fuses
■
Have the cause of electrical overload determined and repaired by any
authorized Toyota retailer or Toyota authorized repairer, or any reliable
repairer as soon as possible.
C-HR_HEV_OM_Europe_OM10764E
OwnersManuals2.com
Advertisement
Table of Contents
