Toyota C-HR 2015 Owner's Manual page 508

4-5. Using the driving support systems
506
Assume an ordinary posture for backing up, rest your hands
4
lightly on the steering wheel without applying any force, directly
confirm the safety of the area to the rear and around the vehicle
and slowly back up while adjusting your speed by depressing the
brake pedal.
● When backing up too quickly, a sharp beeping sound is emit-
ted and assist control is stopped. (
When a level beep is emitted
5
and the stop display
( P. 493) is shown on the

display, stop the vehicle.
Change the shift lever to D, S (M20A-FXS engine) or B
6
(2ZR-FXE engine).
Assume an ordinary driving posture, rest your hands lightly on
7
the steering wheel without applying any force, directly confirm
the safety of the area to the front and around the vehicle and
slowly proceed forward while adjusting your speed by depressing
the brake pedal.
● When departure cannot be accomplished on the first try and
multi-turn maneuvering is necessary, proceed to step
● When multi-turn maneuvering is not necessary, proceed to
step
14
When a level beep is emitted
8
and the stop display
( P. 493) is shown on the

display, stop the vehicle.
C-HR_HEV_OM_Europe_OM10764E
.
P. 493)

.
8
OwnersManuals2.com