Table of Contents
Advertisement
a. To set the lamp being always illuminated: Click the button before "Keep
lamp always on".
b. To automatically turn the lamp off: Click the button before "Turn lamp off
after the scanner has been idle for ... minutes" and then click the up or
down arrows to set a default time for the lamp to automatically turn off after
a scan.
3. Click on OK button to save settings and exit.
Warning
To turn on the lamp again, simply perform any scanning task.
S
L
CANNER
OCK
Your scanner is designed with two different lock statuses to protect the optical
parts. To ensure the scanner working properly, you have to choose an appropriate
lock status according to the situation.
Always Unlock:
A scanning-ready status. Furthermore, if you place your scanner on a long-term
position, you can also keep your scanner lock in this status.
To completely shut down the scanner,
switch off the power from the rear of the
scanner.
If the scanner will not be used for a long
period of time, shut down the scanner and
then disconnect the power cable from the
power outlet.
1. Slide the locking switch on the
scanner's underside backwards and
hold it unreleased.
2. Press down the locking bolt.
3. Move the locking switch forward to
snap into the top notch on the
locking bolt.
31
Advertisement
Table of Contents
