Table of Contents
Advertisement
4. (If you have only one scanner connected with your computer, please skip to
Step 5.)
If you have more than one scanner or other imaging device installed on your
computer: Click Select Source from the File menu of Presto! ImageFolio and
then choose this scanner as the default scanning source.
5. Within Presto! ImageFolio, click File > Acquire > Acquire.
6. In the TWAIN window that opens, select Flatbed Reflective as the Scan Type.
7. Click the Scan button.
8. If an image appears on your screen, your scanner is working properly.
To test the ADF scanning:
1. Load a single-page document face up into the ADF (for detailed instructions on
loading paper into the ADF, please refer to the "Placing Documents" section on
page 18 of this guide.)
2. Select ADF as the Scan Type within the TWAIN window.
3. Click the Scan button.
4. The document in the ADF input tray should be now loaded into the ADF and
scanned. After this process, you should see a scanned image of the document
on your screen.
5. Click Exit to exit the TWAIN window.
I
NSTALLING
Your scanner is TWAIN compliant and functions with virtually all available TWAIN
compatible software. If you purchase additional software to be used with your scanner,
please make sure that it conforms to the TWAIN standard.
A
DDITIONAL
S
OFTWARE
15
Advertisement
Table of Contents
