Table of Contents
Advertisement
2. Load the documents, headfirst and face up, toward the center of the ADF input
tray and all the way into the ADF until touching the bottom.
3. Adjust the paper width slider for the paper size you are using. The paper width
slider should be gently touching both sides of the documents.
Attention
DO NOT load more than 50 sheets of paper (70
2
g/m
, 18 lb.) to the ADF.
Paper scanned from the ADF must be a
minimum of 90x114 cm (3.55 x 4.5", WxL).
Make sure there are no gaps between the
document stack and the paper-width slider;
otherwise, the scanned images can be skewed.
Although the documents should be loaded firmly
in place ensuring optimum scanning accuracy,
they should never be wedged in so tightly that
the process of feeding them through the
scanner is strained.
Do not load additional paper into the ADF while
the unit is feeding and scanning.
19
Advertisement
Table of Contents
