Installing Additional Software; Scanner Setup After Windows Xp Upgrade - Plustek OptiCard 820 User Manual

Plustek opticard 820: user guide

Hide thumbs Also See for OptiCard 820:

Table of Contents

represents the letter of your CD-ROM drive). Carefully follow all the installation

instructions presented in the Setup Wizard. Reboot your computer when prompted,

and plug the USB cable back into the scanner while your computer is still turned on.

Installing Additional Software

Your scanner is TWAIN compliant and functions with virtually all available TWAIN

compatible software. If you purchase additional software to be used with your scanner,

please make sure that it conforms to the TWAIN standard.

If you plan to upgrade your operating system from Windows 98 or Me to Windows

XP after having installed the scanner software, please follow the instructions below:

1. Unplug the scanner's USB cable from the rear of the computer.

2. From the Windows START menu, click on [Programs] and then [Plustek

OptiCard 820]. In the pop-up menu that opens, click on [Uninstall Plustek

OptiCard 820]. Follow the on-screen instructions to remove all the scanner

software.

3. After uninstallation completes, close all open applications and click the [Finish]

button to restart your computer.

4. Start installing your Windows XP upgrade software by following Microsoft's

related procedures.

5. When the Windows XP upgrade is done, re-install the scanner's hardware and

software. Refer to the scanner setup quick guide for details.

Table of Contents