Rear Panel-Px-712A Internal Drive - Plextor PX-712 Installation And User Manual

Section 2. Installing the PX-712A Internal ATAPI Drive
• Emergency eject hole: If the automatic eject button does not work,
insert the emergency eject tool, paper clip, or other thin, rigid object
in this hole to eject tray. Turn OFF power before using this feature.
• Eject button: Push once to eject tray. Push again to insert the tray
back into the PX-712A. To prevent wear on the drive, always use the
eject button to insert the tray.
This button also enables SpeedRead for DVD-Video discs with CSS
protection. To enable SpeedRead, with the disc tray empty, press and
hold the eject button for 3 seconds, then insert a DVD-Video disc.
The disc is played back at an accelerated speed.
Rear Panel—PX-712A Internal Drive
Also familiarize yourself with the drive's rear panel.
Figure 2: Rear panel of the PX-712A internal ATAPI drive
• Digital audio output connector: Outputs a digital stereo signal. Use
this to connect to a sound board that supports Sony/Philips Digital
Interface (SPDIF) or Digital-In.
10
PX-712 Installation and Users Manual