Plextor PX-712 Installation And User Manual page 101

Figure 41: Place jumpers across both the SLAVE and CABLE
SELECT pins to perform the self-test diagnostics on the PX-712A.
9. Insert a blank Plextor-recommended DVD±R or CD-R disc. Be sure
to use only media of the type recommended by Plextor.
If the LED indicator blinks amber three times, the loaded disc is
not a blank DVD±R or CD-R disc. Remove the disc and insert a
blank, Plextor-recommended DVD±R or CD-R disc.
10. The drive begins the diagnostic routine. Upon completion of the
diagnostic, you see the results:
If there was no problem, the disc is ejected automatically.
If there was a problem, the disc is not ejected, and you see the
LED indicator blink green. One green blink indicates a write or
read error. Two green blinks indicate an initialization error.
Section 6. Maintenance and Troubleshooting
PX-712 Installation and Users Manual
91