Table of Contents
Advertisement
TROUBLESHOOTING
Anomalies
The washing machine does
not start.
The wash cycle does not start.
The washing machine does
appears on the display).
The washing machine
continuously loads and
unloads water.
The washing machine does
not drain or spin.
The washing machine
vibrates a lot during the spin
cycle.
The washing machine leaks.
The "Options" and START/
indicator lights
PAUSE
visualises an error code (e.g.:
F-01, F-...).
There is too much foam.
DEMO MODE: to deactivate this function, switch the washing machine OFF. Than press and hold "Start/Pause"
"ON/OFF"
button and hold both buttons for 2 seconds.
Reg
ulatory documentation, standard documentation, ordering spare parts and other product informa-
tion can be found:
www.whirlpool.com.hk
contact our After-sales Service
Possible causes / Solution
t
t
t
button, within 5 seconds press also
9
Advertisement
Chapters
Table of Contents
