Table of Contents
Advertisement
If you want to copy a photo without color
restoration, select the document type without the
color restoration icon. For example the screen
below shows copy photo without color
restoration.
Press the x Start button to choose your document
type. The document is scanned and a preview of
the photo appears on the LCD screen.
Note:
When color restoration is on, the icon appears in the top left of
the LCD screen.
5.
Use the l or r button to view the photos. Use the
u or d button to set the number of copies.
6.
On the control panel, select the paper type and the
paper size that you loaded.
Press the x Start button again. Your photo is
7.
copied.
Copying Multiple Photos
Place each photo vertically as shown in the illustration
below.
You can copy photos from 30 × 40 mm to 127 × 178
mm.
Position each photo at least 10 mm away from the
adjacent photo.
You can copy two 10 × 15 cm (4 × 6 in.) size photos
at a time.
You can copy different-sized photos at the same
time.
Selecting Copy Quality
If you want to make a copy quickly and do not need
high quality, you can print a "Draft" copy.
Alternatively, if you want to print high quality photos,
you can print a "Photo" copy.
1.
Load plain paper and select Plain Paper and A4
on the control panel.
Press the Setup/Utilities button to enter the setup
2.
mode. Use the l or r button to select copy quality.
Press the x Start button to confirm your selection.
3.
4.
Use the u or d button to select Normal, Draft, or
Photo.
Setting
5.
Press the x Start button again to confirm your
selection.
Press the Setup/Utilities button or the
button to return to the previous mode.
Description
This is automatically selected when
you turn the printer on.
Select this if you want to make a
quick copy and quality is not
important.
Select this if you want to print high
quality photos.
Copy Mode
Copying
9
Advertisement
Table of Contents
