National Instruments DAQCard-6533 User Manual page 149

High-speed digital i/o devices
Table of Contents

Advertisement

Index
output state machine (figure), 3-25
output timing diagram (figure), 3-26
requirements for getting started, 1-2
RGND signal (table), C-5
RTSI
overview, 1-1
RTSI and PXI trigger bus interfaces
board, RTSI, and PXI bus
clocks, D-10
RTSI and PXI bus triggers, D-11
trigger specifications, A-3
S
Schottky-diode termination scheme, D-7
signal connections
50-pin signal connections
accessories (table), C-7
pin assignments (figure), C-6
68-pin signal connections
accessories (table), C-3
pin assignments (figure), C-2
change detection, 2-33
control signals (table), C-1
handshaking I/O, 2-21
optional equipment, C-7
pattern I/O, 2-13
signal descriptions (table), C-4
static digital lines, 2-4
signal edge-based handshaking protocols
comparison of protocols (table), 3-4
leading-edge protocol, 3-27
long-pulse protocol, 3-32
trailing-edge handshaking protocol, 3-22
types of protocols, 3-22
sink current, D-9
software (NI resources), F-1
software installation, 1-6
software programming choices
National Instruments application
software, 1-3
NI 653X User Manual
NI-DAQ driver software, 1-4
source current, D-9
specifications
bus interfaces, A-3
change detection, A-3
digital I/O, A-1
environment, A-4
memory, A-2
pattern I/O, A-3
physical, A-4
power available at I/O connector, A-4
power requirements, A-4
triggers
RTSI triggers (PCI, PXI, AT), A-3
start and stop triggers, A-3
standard output, unstrobed I/O, 2-2
start and stop trigger
change detection, 2-31
pattern I/O, 2-9
trigger specifications, A-3
start trigger
change detection, 2-30
pattern I/O, 2-8
STARTTRIG<1..2> signal
and the REQ signal, 3-3
control signals for handshaking I/O and
pattern I/O (table), C-1
startup sequence for handshaking I/O
controlling line polarities, 2-23
initialization order, 2-22
static digital lines
configuring
open-collector output, 2-2
standard output, 2-2
connecting signals, 2-4
controlling and monitoring, 2-2
Port 4 lines (table), 2-4
programming unstrobed I/O
control/timing lines as extra
unstrobed data lines, 2-5
flowcharts, 2-5
I-10
ni.com

Advertisement

Table of Contents
loading

Table of Contents