Fixing The Hangstrap; Resetting The Test Tool - Fluke ScopeMeter 190 II Series 190-104 User Manual

Fixing the Hangstrap

A hang strap is supplied with the test tool. The figure
below shows how to attach the strap correctly to the test
tool.
Figure 40. Fixing the Hangstrap

Resetting the Test Tool

If you want to reset the test tool to the factory settings,
without clearing the memories, do the following:
1 Turn the test tool off.
2 Press and hold.
USER
3 Press and release.
The test tool turns on, and you should hear a double beep,
indicating the reset was successful.
4 Release.
USER
6
Tips
Fixing the Hangstrap
81