Table of Contents
Advertisement
Comparing Waveforms
You can display a fixed reference waveform with the
actual waveform for comparison.
To create a reference waveform and to display it with the
actual waveform, do the following:
1
Display the
SCOPE
2
Open the Waveform Options
F4
menu.
3
Jump to the Waveform field and
select Reference... to open the
ENTER
WAVEFORM REFERENCE
key labels.
SCOPE
menu.
Using the Scope and Meter
4
Select On to display the reference
waveform. This can be:
ENTER
- the last used reference waveform
(if not available no reference
waveform will be shown).
- the envelope waveform if the
persistence function Envelope is
on.
Select Recall... to recall a saved
waveform (or waveform envelope)
from memory and use it as a
reference waveform.
Select New... to open the
REFERENCE
If you selected New... continue at
step 5, else go to step 6.
5
Select the width of an additional
envelope to be added to the
momentary waveform.
1
Acquiring Waveforms
NEW
menu.
33
Advertisement
Table of Contents
