Important: It is strongly recommended that you read this section carefully before using the projector. These safety and usage instructions will ensure that you enjoy many years of safe use of the projector. Keep this manual for future reference. Symbols Used Warning symbols are used on the unit and in this manual to alert you of hazardous situations.
Page 5
Unplug the power cord before cleaning. See Cleaning the Projector on page 37. Allow the lamp to cool for about one hour. Regulatory Warnings Before installing and using the projector, read the regulatory notices in the Regulatory Compliance section on page 46. Symbol Explanations DISPOSAL: Do not use household or municipal waste collection services for disposal of electrical and electronic equipment.
Input source automatically detected. Register Your Planar Products Today Thank you for choosing Planar. To assure you receive all the benefits of your Planar product and services, reg- ister your Planar product today. Visit our website to register your product at http://www.planar.com/support/product_registration.html...
Packing Checklist Carefully unpack the projector and check that the following items are included: PR5021 DLP projector RGB cable Contact your dealer immediately if any items are missing, appear damaged, or if the unit does not work. It is recommend that you keep the original packing material should you ever need to return the equipment for warranty service.
Focus ring Zoom ring Function keys Important: Ventilation openings on the projector allow for good air circulation, which keeps the projector lamp cool. Do not obstruct any of the ventilation openings. Description Receiver for IR signal from remote control Push to release height adjuster...
▼ (Down cursor) / KEYSTONE MENU ◄ (Left cursor) / VOL Description Turns the projector On or Off Detects the input device Optimizes image size, position, and resolution Navigates and changes settings in the OSD Quick Menu – For Keystone Navigates and changes settings in the OSD Quick Menu –...
® Projector – User’s Manual Rear view 1 2 3 4 Item Label AC IN (USB) S-video Video Audio-in RGB IN RGB OUT RS-232 (Security Lock) Note: If your video equipment has both S-VIDEO and RCA jacks (composite video) connect to the S-VIDEO connector.
Height adjustor button Note: When installing, ensure that you use only UL Listed ceiling mounts. Description Contact your dealer for information on mounting the projector on a ceiling Rotate adjuster lever to adjust angle position. Remove when changing the lamp.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path between the remote control and the projector is obstructed, you can bounce the signal off certain reflective sur- faces such as projector screens.
Page 15
Left cursor Enter Page Up Description Transmits signals to projector Lights when the remote control is used Press to operate the on-screen pointer Up arrow when connected through USB to a PC Right arrow when connected through USB to a PC...
Page 16
Laser Description Left arrow when connected through USB to a PC Enter key when connected through USB to a PC Turns the projector on or off Use as on-screen pointer. DO NOT POINT IN EYES. – 8 – See page:...
Provided you are not holding the remote perpendicular to the sides or the rear of the projector, the remote will function well within a radius of about 7 meters (23 feet) and 15 degrees above or below the projector level. If the projector does not respond to the remote control, move a little closer.
Replace the cover. Caution: 1. Only use AAA battery (Alkaline batteries are recommended). 2. Dispose of used batteries according to local ordinance regulations. 3. Remove the battery when not using the projector for prolonged periods. Setup and Operation – 10 –...
Connecting Input Devices A PC or notebook computer and video devices can be connected to the projector at the same time. Video devices include DVD, VCD, and VHS players, as well as movie camcorders and digital still cameras. Check the user manual of the connecting device to confirm it has the appropriate output connector.
® Projector – User’s Manual Starting and Shutting down the Projector Connect the power cord to the pro- jector. Connect the other end to a wall outlet. POWER and READY LEDs on the projector light. Turn on the connected devices.
Page 21
POWER button. The pro- jector turns off. Caution: 1. Be sure to remove the lens cap before starting projector. 2. Do not unplug the power cord until the READY LED stops flashing–indicating the projector has cooled down. ® Projector – User’s Manual...
OSD menus.) Important: Keep the password in a safe place. Without the password, you will not be able to use the projector. If you lose the password, contact your reseller for information on clearing the password.
Page 23
Enter the password in the order you set it at step 5. In case you forget the password, please contact the service center. Service center will validate the owner and help reset the password. ® Projector – User’s Manual – 15 –...
Position the projector so that it is perpendicular to the screen. • Ensure the cables are in a safe location. You could trip over them. To raise the level of the projector, lift the projector [A] and press the height-adjuster button [B]. The height adjuster drops down [C].
Adjusting the Focus, Zoom and Keystone Use the Image-focus control (on the projector only) to sharpen the projected image Use the Image-zoom control (on the projector only) to resize the pro- jected image and screen size Use the KEYSTONE buttons (on the projec-...
® Projector – User’s Manual Adjusting the Volume Press the Volume +/- buttons on the remote control. The volume control appears on the display. Press the Left or Right Cursor buttons on the keypad to adjust Volume +/-. Press the MUTE button to...
The projector has an OSD that lets you make image adjustments and change various settings. Navigating the OSD You can use the remote control cursor buttons or the buttons on the top of the projector to navigate and make changes to the OSD. The following illustration shows the corresponding buttons on the re- mote control and on the projector.
® Projector – User’s Manual Image Menu Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Image Menu. Press the cursor ▲▼ button to move up and down in the Image menu. Press ◄► to change values for settings.
(Range: Warm , Normal , Cold) Press Color Manager Green-Blue-Cyan-Magenta-Yellow-White). See page tion on Description (Enter) / ► to enter the color manager menu. (Range: Red- Color Manager – 23 – ® Projector – User’s Manual 24 for more informa-...
® Projector – User’s Manual Color Manager Press (Enter) / ► to enter the Color Manager sub menu. Item Select to enter the Red Color Manager. Press the ◄► buttons to adjust the Hue, Saturation, and Gain. Select to enter the Green Color Manager.
Press the cursor ◄► button to adjust the A/D sampling clock. Tracking Press the cursor ◄► button to adjust the A/D sampling dot. Press Auto Image and position. Description (Enter) / ► to automatically adjustment for phase, tracking, size – 25 – ® Projector – User’s Manual...
® Projector – User’s Manual Video/Audio Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Video/Audio menu. Press the cursor ▲▼ button to move up and down in the Video/Audio menu.
Press Enter / ► to enter the audio submenu. Item Press the ◄► buttons to adjust the audio volume. Volume (Range: 0~8) Mute Press the ◄► buttons to turn on or off the speaker. ® Projector – User’s Manual Description – 27 –...
® Projector – User’s Manual Installation I Menu Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa- tion I menu. Press the cursor ▲▼ button to move up and down in the Installation I menu. Press ◄►...
(Enter) / ► to enter the Advanced menu. See Advanced Feature on (Enter) / ► to reset all items to factory preset values. (Enter) / ► to enter the Status menu. See page 33 for more informa- Status – 29 – ® Projector – User’s Manual...
® Projector – User’s Manual Advanced Feature Press the Menu button to open the OSD menu. Press ◄► to move to the Installation II menu. Press ▲▼ to move to the Advanced menu and then press Enter or ► . Press ▲▼ to move up and down in the Advanced menu.
(Enter) / ► to test the IR remote controller for diagnostic. (Enter) / ► to test the USB connection with connected PC. (Enter) / ► to test the button on keypad. (Enter) / ► to select different colors on screen. – 31 – ® Projector – User’s Manual...
Lamp hour used information is displayed. Eco and Normal counters are sepa- Lamp Hours rated. (Enter) / ► to reset all the menu items to the factory default values (Enter) / ► to enter the Status sub menu. Description – 33 – ® Projector – User’s Manual...
Disposal of this product must be carried out in accordance with the regulations of your local authority. Warning: Be sure to turn off and unplug the projector at least 30 minutes before replacing the lamp. Failure to do so could result in a severe burn. Loosen the two captive screws on the lamp com- partment cover.
Page 43
Note: The lamp module must sit securely in place and the lamp connector must be connected properly before tightening the screws. ® Projector – User’s Manual – 35 –...
® Projector – User’s Manual Resetting the Lamp After replacing the lamp, you should reset the lamp hour counter to zero. Refer to the following: Press the MENU button to open the OSD menu. Press the cursor ◄► button to move to the Installation II menu.
Cleaning the projector to remove dust and grime will help ensure trouble-free operation. Warning: 1. Be sure to turn off and unplug the projector at least 30 minutes before cleaning. Failure to do so could result in a severe burn.
® Projector – User’s Manual Using the Kensington® Lock If you are concerned about security, attach the projector to a permanent object with the Kensington slot and a security cable. Note: Contact your vendor for details on purchasing a suitable Kensington security cable.
Common problems and solutions These guidelines provide tips to deal with problems you may encounter while using the projector. If the problem remains unsolved, contact your dealer for assistance. Often after time spent troubleshooting, the problem is traced to something as simple as a loose con- nection.
In the event of an error, please disconnect the AC power cord and wait for one (1) minute before re- starting the projector. If the Power or Ready LEDs are still blinking or the Over Temp LED is lit, contact your service center.
Having the Projector Serviced If you are unable to solve the problem, you should have the projector serviced. Pack the projector in the original carton. Include a description of the problem and a checklist of the steps you took when trying to fix the problem: The information may be useful to service personnel.
Timing Mode Table The projector can display several resolutions. The following table outlines the resolutions that can be displayed by the projector. Signal Resolution NTSC — PAL/SECAM — 640 x 350* 640 x 400* 720 x 400* 640 x 480...
Page 52
® Projector – User’s Manual Signal Resolution 640 x 480 832 x 624 Apple Mac 1024 x 768 1152 x 870 480i SDTV 576i 480p EDTV 576p 720p 720p HDTV 1080i 1080i O: Frequency supported —: Frequency not supported * : Displayable level The resolution of the panel is 800 x 600.
FCC Warning This equipment has been tested and found to comply with the limits for a Class B digital device pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communica- tions.