Table of Contents
Advertisement
3.3 Management Method
User can manage the 802.3bt PoE++ Managed Injector Hub by Web Management via a network connection.
3.3.1 Web Management
The 802.3bt PoE++ Managed Injector Hub can be configured through an Ethernet connection. The factory default IP
address is 192.168.0.100 with subnet mask 255.255.255.0, so please make sure the manager PC must be set to the
same IP subnet address. For example, if 802.3bt PoE++ Managed Injector Hub IP address is set to factory default, then
your manager PC should be set to 192.168.0.x (where x is a number between 1 and 254, except 100) with a subnet mask
of 255.255.255.0.
1. Use Internet Explorer 8.0 or above Web browser. Enter IP address http://192.168.0.100 to access the Web interface.
2. When the following login screen appears, please enter the default username "admin" and password "admin" to log in
the main screen of 802.3bt PoE++ Managed Injector Hub. The login screen in
Default IP Address: 192.168.0.100
Default Account: admin
Default Password: admin
Figure 3-1-2: 802.3bt PoE++ Managed Injector Hub Web Login Screen
1. For security reason, please change and memorize the new password after this first setup.
2. Only accept command in lowercase letter under Web interface.
User's Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
Figure 3-1-1: IP Management Diagram
28
Figure 3-1-2
appears.
Advertisement
Table of Contents
