LAN Configuration
Object
Connection Type
IP Address
Netmask
Gateway
Primary DNS
Secondary DNS
Second IP
Second IP Address
Second IP Netmask
Apply Settings
Cancel Settings
Table 4-3-1: Descriptions of the LAN Configuration Objects Screen
4.3.2 IPv6
This page is used to configure parameter for IPv6 internet network which connects to LAN port of the 802.3bt PoE++
Managed Injector Hub as shown in
802.3bt PoE++ Managed Injector Hub's LAN. In this setting you may change LAN connection type and other settings.
IPv6 – LAN
Object
Type
IPv6 Address
Subnet Prefix Length
Description
Provide Static and DHCP for IP connection type, the default is Static.
The LAN IP address of the 802.3bt PoE++ Managed Injector Hub and default
is 192.168.0.100.
Default is 255.255.255.0.
Default is 192.168.0.254.
Default is 8.8.8.8.
Default is 8.8.4.4.
Provide Disable and Enable for second IP, the default is Disable.
Default is 0.0.0.0.
Default is 0.0.0.0.
Save current configuration.
Ignore current configuration.
Figure
4-3-3. It allows you to enable IPv6 function and set up the parameters of the
Figure 4-3-3: IPv6-LAN Web Page
Description
Select IPv6 type either by using DHCP or Static.
Enter the IPv6 address.
Enter the subnet prefix length.
Table 4-3-2: Descriptions of the IPv6 Configuration Objects Screen
User's Manual of UPOE-800G/UPOE-1600G/UPOE-2400G
42