Starting Web Management; Logging In To The Managed Switch - Planet Networking & Communication GS-4210 Series Quick Installation Manual

8-/16-/24-/48-port 10/100/100t+ 2-/4-port 100/1000x sfp managed switch
Hide thumbs Also See for GS-4210 Series:
Table of Contents

Advertisement

4. Starting Web Management

The following shows how to start up the Web Management of the Managed
Switch. Note the Managed Switch is configured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100;
then the manager PC should be set to 192.168.0.x (where x is a number
between 1 and 254, except 100) and the default subnet mask is 255.255.255.0.
Managed Switch
IP Address:
192.168.0.100

4.1 Logging in to the Managed Switch

1. Use Internet Explorer 8.0 or above Web browser and enter IP address
https://192.168.0.100 to access the Web interface.
2. When the following dialog box appears, please enter the default user name and
password "admin". The login screen in Figure 4-2 appears.
Default IP address: 192.168.0.100
Default Username: admin
Default Password: admin
10
RJ45/UTP Cable
Figure 4-1: IP Management Diagram
PC / Workstation
with Web Browser
192.168.0.x

Advertisement

Table of Contents
loading

Table of Contents