Table of Contents
Advertisement
Keyboard
NOTE:
The keyboard spare part kit includes a keyboard cable.
Description
Keyboard
For a detailed list of available keyboards, see
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the memory module/wireless module compartment cover (see
6.
Remove the hard drive compartment cover (see
Remove the keyboard:
1.
Remove the Phillips PM2.5×6.0 screw that secures the keyboard to the computer just below the WLAN
module slot.
2.
Rest and secure the computer on its left side with the bottom toward you, and then partially open the
computer.
3.
Using a flat-bladed screwdriver or similar tool, push the tabs of the three keyboard clips (1) that are
visible inside the battery bay towards the rear of the computer to loosen the keyboard.
54
Chapter 4 Removal and replacement procedures
Sequential part number listing on page
Battery on page
36).
Hard drive on page
Spare part number
698694-xx1
24.
WLAN module on page
49).
45).
ENWW
Advertisement
Table of Contents
