Bissell 1986 User Manual page 8

Filling Your Clean Water Tank:
For Future Use if selecting Antibacterial Formula with EasyFill
1
The Clean Water
Tank is at the top
of the machine.
Clean Water Tank
(1 Gallon)
Dirty Water Tank
4
A few notes about fi lling the Clean Water Tank:
• Fill with hot (140°F/60°C MAX) tap water and add the appropriate
BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR
TANK IN MICROWAVE.
• When using BISSELL Antibacterial formula: Only fi ll your Clean Water Tank
with the recommended amount of water and formula to achieve antibacterial
benefi ts.
NOTICE: BISSELL Antibacterial formula is only for BISSELL machines with EasyFill
System.
NOTICE: Do not overwet carpet. Be careful not to run over loose objects or edges of area
rugs. Stalling the brush may result in premature belt failure.
8
www.BISSELL.com
2
Lift the tank straight
up to remove from the
machine.
After filling the tank with hot
tap water, twist the yellow cap
back onto the tank.
Firmly insert the full-size
formula bottle into the cap
on the tank and squeeze until
formula reaches the EasyFill line.
With Trial Size Antibacterial
Formula: Pour into the clean
tank up to the EasyFill line.
Twist cap back on to tank.
3
Unscrew the cap from the
tank. Add hot tap water to
the water fill line.
5
At the bottom of the Upper
Handle, align the tank with
the grooves and slide the
tank into place.