Page 1
REVOLUTION ™ USER GUIDE 2007 Series More of a video person? Look for this icon and go online for an instructional how-to video at www.BISSELL.com www.BISSELL.com...
» Do not use without filters in place. » Do not use with damaged cord or plug. If appliance is not » Use only BISSELL® cleaning formulas intended for use with working as it should, or has been dropped, damaged, left this appliance to prevent internal component damage.
Thanks for buying a BISSELL® carpet cleaner! We love to clean and we’re excited to share one of our innovative products with you. We want your carpet cleaner to work like new for the years to come, so this guide has tips on how to use, maintain and, if there’s a problem, troubleshoot.
• If cleaning an entire room, consider moving your furniture to another area. • Use a dry vacuum cleaner over area before using your carpet cleaner. • Pretreat stains with BISSELL® Pretreat to improve performance on co ee stains and ground-in dirt.
Page 5
Wrap the cord around Clean Water Tank with screw (found taped to the Carry Handle and the grooves and slide Upper Handle) into the Quick Release™ Cord the tank into place. Carry Handle. Wrap hook. www.BISSELL.com...
Page 6
(Optional) cleaning results. results. NOTE: Fill with hot (140°F/60°C MAX) tap water and add the appropriate BISSELL formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. Do not substitute BISSELL cleaning formula with other household cleaning products.
Page 7
BISSELL® formula. DO NOT USE BOILING WATER. DO NOT HEAT WATER OR TANK IN MICROWAVE. • When using BISSELL Antibacterial formula: Only fi ll your Clean Water Tank with the recommended amount of water and formula to achieve antibacterial benefi ts.
Page 8
• It is common to refill the Clean Water Tank and empty the Dirty Water Tank multiple times throughout your cleaning process. Room size and the speed at which you clean are both factors that a ect how often the tank may need to be refilled and/or emptied. www.BISSELL.com...
Page 9
The window of the the button will be scrubbing and suction. button will be red and show green and show an “I” an “O” symbol when it is off. symbol when it is on. www.BISSELL.com...
Page 10
Power Switch to turn tool. Detach the hose and tool and close the Accessory machine ON. Hose Door. Let the hose and tool air dry before storing. www.BISSELL.com...
Page 11
WET MODE NOTE: Start from the area farthest away. Hold the trigger down, and pull the tool toward you. Keep the tool in contact with the surface as you pull. You will see extraction through the Nozzle. www.BISSELL.com...
Page 12
With the arrows aligned, the Float Stack should Did You Know? lock into place. The Float Stack Return the ring and is what prevents twist to lock. Water may your dirty leak if the ring is not tank from fully tightened. overflowing. www.BISSELL.com...
Page 13
Finally, release the trigger and extract the water. See page the tank to the machine. 12 to clean the Dirty Water Tank from the water that was just extracted. Twist cap back on tightly. www.BISSELL.com...
Page 14
Brush Rolls. near the floor and rotate to snap back into place. NOTICE: To reduce the risk of a leaking condition, do not store unit where freezing may occur. Damage to internal components may result. www.BISSELL.com...
Page 15
NOTE: To replace Brush Rolls, remove them from the metal posts and replace. Make sure the metal post goes completely through the end of the Brush Roll. The bristles should be aligned in a ‘V’ pattern as pictured. www.BISSELL.com...
Page 16
Slide the wheel up back into the slot and Snap the Belt Access Door back secure with the screw that was removed. down into place. NOTE: See Step 6 on page 14 for how to put the Brush Roll Cover and Nozzle back in place. www.BISSELL.com...
“water line” printed on cup. Water Sprays from Rinse & Storage Tray Machine is in “Reclined” position. Turn power OFF. Shift handle into the upright position. Proceed to use the tray as instructed, do not recline machine. www.BISSELL.com...
Care by E-mail or telephone as described it was sold. below. BISSELL is not liable for incidental or consequential damages of any nature It may be necessary to obtain some of your personal information, such as a mailing associated with the use of this product.
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty page for details. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. Love y r product? BISSELL®...