Planar C3 Reference Manual page 24

QUICK LINKS
Contents
Index
Regulatory Compliance
Product Information
Warranty
GETTING STARTED
About the Display
Package Contents
Identify Components
Position Display
Desk Stand Features
INSTALLING THE DISPLAY
Set DIP Switch
Install Display Controller
Connect Video and Power
Install Display Driver
Change Display Properties
Dome CXtra Software
APPENDIXES
Troubleshooting
Specifications
LED Status Lights
Single Desktop
USB Connection
Component Removal
Power Management
Palette Options
To set driver options
Beware that the Disable DirectDraw driver option has specific conditions which may
affect your display.
The Mirror option allows you to view the display with a mirror.
The NTSC 32->8 option, when enabled, converts color to grayscale in accordance
with the NTSC standard. However, in some configurations, you may see artifacts on
the screen after a popup window is closed.
In the Driver Options field of the Dome tab, select Disable DirectDraw.
Click Apply or OK.
To get information
Information about the flat panel, display controller, and driver appears on the lower
half of the Dome tab, as shown here.
Panel information includes panel type, serial number, backlight usage, and
onboard temperature (in degrees Celsius). The temperature reading of a panel
is given when you first open the panel and if you later select it. The revision numbers
of the firmware and microcontrollers are also included. General information includes
display controller type, driver version, and library version.
Dome C3i Display
12