Before You Begin - Planar Dome C2 Quick Reference Manual

Before You Begin

This quick reference provides instructions for installation of the Dome C2, C3, C3i, or C5i
display system. Note that the location of the DIP switch differs on the DX and DX2 display
controllers, but both boards have identical instructions for installation and are supported by
the same driver. Check that your system meets these requirements.
CX Display Display Controller
Dome C2 DX
Dome C3 DX
Dome C3i DX2
Dome C5i DX
Increasing the PCI Bus Performance
(PCICacheMode registry entry)
On systems with 64-bit PCI slots, use the display driver
to enable write-combining for the display controller.
Enabling this function can improve video performance
on the board by 100% or more. The results: faster
image loads, increased window and level speed, and
enhanced system performance.
For more information, visit www.planar.com.
2
System Requirements
•
PCI slot per board
•
50 MB hard disk space
•
256 MB RAM
•
CD-ROM drive
Operating System
Windows XP/2000
Warning
Avertissement
Avvertenza
Advertencia
Wear an antistatic heel or wrist
strap when installing the controller
and display to avoid damage to
computer components.
Warnung