Miele CM 7550 CoffeePassion Operating Instructions Manual page 90

Problem solving guide
Problem
The brew unit cannot be
removed.
Coffee is not flowing
out of the central spout.
Or coffee is only being
dispensed via one
spout.
Neither milk nor milk
froth comes out of the
central spout.
90
Cause and remedy
The brew unit is not in the correct position because
the appliance door was opened during the grinding
or brewing process, for example.
 If necessary, move the handle on the brew unit
back to the start position. Close the appliance
door.
 Switch the coffee machine off with the On/
Off button .
 Disconnect the coffee machine from the power
supply.
 Wait approx. 1 minute before reconnecting the
coffee machine to the electricity supply and
switching it on.
This will initialise the brew unit drive and put it back
into the start position.
 If necessary, repeat these steps.
The central spout has a blockage.
 Rinse the coffee pipework (see "Cleaning and care
- Rinsing the machine").
If there is still no coffee coming out, or coffee is only
coming out of one side
 Dismantle the central spout and clean all parts
carefully.
 Make sure all parts are reassembled correctly.
The milk pipework is blocked.
 Clean the central spout and milk pipework
carefully with the brush.