Miele CM 7550 CoffeePassion Operating Instructions Manual page 89

Problem
Fill and refit the water con-
appears after
tainer
switching on even
though the container is
filled and fitted in the
machine. The appliance
does not rinse.
Insert the drip tray and the
appears
waste container
in the display, even
though both have been
inserted.
Although the drip tray
has been emptied,
Empty the drip tray and the
waste container appears
in the display.
The waste container is
overflowing even
though the drip tray and
waste container have
been emptied following
each reminder.
Cause and remedy
The descaling cartridge is not fitted. The coffee
machine needs descaling.
 Switch the coffee machine off with the On/
Off sensor control .
 Wait approx. one hour.
 Switch the coffee machine back on.
 As soon as
Heating-up phase
Mainten. .
 Touch
Descale the machine
 Descale the coffee machine.
The drip tray is not in the correct position and is
therefore not detected.
 Empty the drip tray and the waste container if
necessary.
 Reassemble all parts and push the drip tray back
in the coffee machine until it clicks.
The drip tray has probably been removed without the
waste container being emptied.
Removing the drip tray resets the internal counter for
emptying the waste container.
 Always empty the waste container if you remove
the drip tray.
Certain types of beans produce a lot of coffee when
they are ground, meaning that larger coffee pucks
are pressed.
 Adapt the quantity of coffee and grinder setting if
necessary.
 Empty the waste container more often than
indicated in the display.
Problem solving guide
appears, touch
.
89