Miele CM 7550 CoffeePassion Operating Instructions Manual page 66

Cleaning and care
 Remove the dispensing unit to the
front.
 Twist off the upper section  with the
holder for the milk pipework. Pull the
component off. Then pull the Y-
shaped piece  off. Remove the
dispensing spouts .
Cleaning the central spout
Clean the central spout's stainless
steel cover by hand only, using
warm water and a little washing-up
liquid.
 Clean all parts thoroughly by hand.
66
Tip: With the exception of the stainless
steel cover, all parts of the central spout
should be cleaned in the dishwasher
from time to time to give them a
thorough clean. This will remove coffee
deposits and milk residues effectively.
 Clean the surfaces of the central
spout with a damp sponge cloth.
 Clean any blockages in the milk
pipework under running water with
the cleaning brush supplied: to do
this, insert the brush in the pipework.
Move it back and forth until all milk
residue has been removed.
Inserting the central spout
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
 Fit the dispensing unit back together.
Push the spouts  firmly back onto
the dispensing unit.
Make sure that all parts are tightly
connected to one another.
 Refit the dispensing unit into the
central spout.
 Refit the stainless steel cover.
 Confirm with OK.