Display - Pioneer Elite VSX-91TXH Operating Instructions Manual

Controls and displays

Display

1
AUTO
L
PCM
SL
HDMI
SBL SB
DIGITAL
ANALOG
STREAM DIRECT
2
PRO LOGIC
N
THX ADV.SURROUND
STEREO
STANDARD
AB
SP SLEEP
13 14 15
1 SIGNAL indicators
Light to indicate the currently selected input signal.
AUTO lights when the receiver is set to select the input
signal automatically (page 29).
2 Program format indicators
These change according to which channels are active in
digital sources.
L – Left front channel
C – Center channel
R – Right front channel
SL – Left surround channel
S – Surround channel (mono)
SR – Right surround channel
SBL – Left surround back channel
SB – Surround back channel (mono)
SBR – Right surround back channel
LFE – Low frequency effects channel (the ((( ))) indicators light when
an LFE signal is being input)
3 Digital format indicators
Light when a signal encoded in the corresponding format
is detected (DSDPCM lights during the DSD (Direct
Stream Digital) to PCM conversion with SACDs).
4 S.RTRV
Lights when the Sound Retriever is switched on (page 31).
5 MULTI-ZONE
Lights when the MULTI-ZONE feature is active (page 55).
6 PHASE CONTROL
Lights when the Phase Control is switched on (page 10).
7 Sound processing indicators
Light according to the active AV parameter(s) (page 63).
OVER lights to indicate that the level of an analog source
is too high. ATT lights when you use the attenuator
(ANALOG ATT) to reduce it.
8 V.SB
Lights during Virtual surround back processing (page 30).
9 TUNER indicators
TUNED – Lights when a broadcast is being received.
STEREO – Lights when a stereo FM broadcast is
being received in auto stereo mode.
2 3 4
2 2HD
DIGITAL
C R
WMA9 Pro
DTS MULTI-ZONE
S SR
AAC DSD PCM
S.RTRV
SBR
LFE
CD-R
eo
: 6
16 17
5 6 7 8 9
DNR TUNED
DIALOG E ATT OVER STEREO
MONO
SOUND Hi-Bit/Sampling V.SB
HDMI
18
MONO – Lights when the mono mode is set using
the MPX button.
10 SOUND
Lights when any of the Midnight, Loudness or tone
controls feature is selected (page 31).
11 Master volume level
12 SR+
Lights when the SR+ mode is switched on (page 58).
13 STREAM DIRECT
Lights when Direct / Pure Direct is selected (page 28).
14 Speaker indicators
Indicate the current speaker system, A and/or B (page 53).
15 Listening mode indicators
THX – Lights when a Home THX mode is selected.
ADV.SURROUND – Lights when an Advanced
Surround mode has been selected (page 27).
STEREO – Lights when the stereo mode is selected
(page 28).
STANDARD – Lights when a Standard Surround
mode is switched on (see Listening in surround
sound on page 26).
16 SLEEP
Lights when the receiver is in sleep mode (page 65).
17 Matrix decoding format indicators
2PRO LOGIC IIx – This lights to indicate 2 Pro
Logic II / 2 Pro Logic IIx decoding (page 26).
Neo:6 – When one of the Neo:6 modes of the receiver
is on, this lights to indicate Neo:6 processing
(page 26).
18 Character display
Displays various system information.
19 HDMI connection indicators
Light to indicate the HDMI input currently selected.
10
11 12
dB
SR+
[ 1 ] [ 2 ]
19
04
23
En