Table of Contents
Advertisement
12
Making receiver settings from the System Setup menu
The following section describes how to change the speaker-related settings manually and make various other
settings (input selection, OSD language selection, etc.).
! With factory default settings, the on-screen display will be output from all HDMI output terminals and
displayed on any TV connected via HDMI cable. You can change where the screen is output in the
MAIN/HDZONE
(page 114
) and HDMI output
1
Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver.
2
Press MAIN RECEIVER to switch the remote control to the receiver operation mode, and
then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
! Press HOME MENU at any time to exit the HOME MENU.
3
Select 'System Setup' from the HOME MENU, then press ENTER.
4
Select the setting you want to adjust.
! Input Setup – Specifies what you've connected to the digital, HDMI and component video inputs (see
Input Setup menu
on
page 59
).
! HDMI Setup – Synchronizes this receiver with your Pioneer component supporting Control with HDMI
82
).
! Manual SP Setup – Sets the placement of the speakers, usage pattern, as well as the size, number, distance
and overall balance of the connected speakers
! MHL Setup – Changes the settings related to MHL (see
! OSD Language – The GUI screen's display language can be changed (see
guage (OSD Language)
on
page 60
).
! Other Setup – Makes customized settings to reflect how you are using the receiver (see
menu
on
page 112
).
Manual speaker setup
This receiver allows you to make detailed settings to optimize the surround sound performance. You only need
to make these settings once (unless you change the placement of your current speaker system or add new
speakers).
These settings are designed to customize your system, but if you're satisfied with the settings made in
Automatically conducting optimum sound tuning (Full Auto MCACC)
of these settings.
CAUTION
! The test tones used in the Manual SP Setup are output at high volume.
1
Select 'Manual SP Setup', then press ENTER.
See
Making receiver settings from the System Setup menu
2
Select the setting you want to adjust.
If you are doing this for the first time, you may want to adjust these settings in order:
! Speaker System – Sets the placement/usage pattern of the speakers
! Speaker Setting – Specifies the size and number of speakers you've connected
! Channel Level – Adjusts the overall balance of your speaker system
! Speaker Distance – Specifies the distance of your speakers from the listening position
! X-Curve – Adjusts the tonal balance of your speaker system for movie soundtracks
(page 92
) settings.
(Manual speaker setup
on
page 110
).
MHL Setup
on
page 112
).
Changing the OSD display lan-
The Other Setup
on
page 57
, it isn't necessary to make all
on
page 110
if you're not already at this screen.
(page 110
).
(page 111
).
(page 112
).
(page 112
(page 112
).
3
Make the adjustments necessary for each setting, pressing RETURN to confirm after each
screen.
Speaker system setting
! Default setting: 7.2.2/5.2.2/7.2ch
This receiver can be used for various applications such as surround back terminal and top middle speaker termi-
nal. Here, application for these terminals are set. Select from the following items.
! For details on arranging speakers during each setup, refer to
! For details on connecting speakers during each setup, refer to
1
Select 'Speaker System' from the Manual SP Setup menu.
See
Making receiver settings from the System Setup menu
2
Select the speaker system setting.
! 7.2.2/5.2.2/7.2ch – Select for normal home theater use with top middle speakers in your main (speaker sys-
tem A) setup.
! 9.2.2ch TMd/FH – Select for normal home theater use with top middle and front height speakers in your
main (speaker system A) setup.
! 7.2.4ch SB Pre out – Select for the maximum 7.2.4 channel surround system including top forward and top
The
backward speakers, with the surround back channel connected to an external amplifier.
! 7.2.4ch Front Pre out – Select for the maximum 7.2.4 channel surround system including top forward and
(page
top backward speakers, with the front channel connected to an external amplifier.
! 7.2.2ch Front Bi-Amp – Select this setting if you're bi-amping your front speakers (see
ers
on
page 25
).
! 7.2.2/7.2ch + SP-B – Select to use the B speaker terminals (EXTRA 1) to listen to stereo playback in another
room (see
Switching the speaker terminals
! 7.2ch + HDZONE – Select to use the EXTRA 1 speaker terminal to connect to the HDZONE separately from
the sound of the main 7.2 channel system
! 5.2 Bi-Amp+HDZONE – Select this to use the surround back speaker terminals for an independent system in
another zone with the front speakers bi-amped
ZONE controls
on
page 93
).
! 5.2ch + SP-B Bi-Amp – Select this setting if you're bi-amping your B speakers
page 25
).
! 5.2ch F+Surr Bi-Amp – Select this setting if you're bi-amping your front and surround speakers
your speakers
on
page 25
).
! 5.2ch F+C Bi-Amp – Select this setting if you're bi-amping your front and center speakers
speakers
on
page 25
).
! 5.2ch C+Surr Bi-Amp – Select this setting if you're bi-amping your center and surround speakers
your speakers
on
page 25
).
! Multi-ZONE Music – See
Using Multi-ZONE Music
! 5.2 +ZONE 2+HDZONE – Select to use the surround back (ZONE 2) and EXTRA 1 (HDZONE) speaker termi-
nals for an independent systems in another zone (see
! 5.2 +ZONE 2+ZONE 3 – Select to use the surround back (ZONE 2) and EXTRA 1 (ZONE 3) speaker terminals
for an independent systems in another zone (see
3
When 'Setting Change?' is displayed, select Yes.
If No is selected, the setting is not changed.
You will return to the Manual SP Setup menu.
).
110
The System Setup and Other Setup menus
Determining the speakers' application
Installing your speaker system
on
page 110
if you're not already at this screen.
Bi-amping your speak-
on
page 91
).
(Using the MULTI-ZONE controls
on
page 93
).
(Bi-amping your speakers
on
page 25
and
Using the MULTI-
(Bi-amping your speakers
(Bi-amping your
on
page 111
.
Using the MULTI-ZONE controls
on
page 93
Using the MULTI-ZONE controls
on
page 93
on
page 19
.
on
page 26
.
on
(Bi-amping
(Bi-amping
).
).
Hide quick links:
Advertisement
Table of Contents
