Basic Recording From The Tv - Pioneer DVR-310-S Operating Instructions Manual

Pioneer dvr-310-s: operating instruction
Hide thumbs Also See for DVR-310-S:
Table of Contents

Advertisement

Recording
06

Basic recording from the TV

VR mode
Video mode
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc is full or you stop the recording.
1
Load a recordable disc.
• If you load a new blank DVD-RW disc, the recorder
takes a short while to initialize the disc.
2
Use the REC MODE button to set the picture
quality/recording time.
• See Setting the picture quality/recording time on
page 43 for detailed instructions.
44
En
AUDIO
CHANNEL
ENTER
PAUSE
REC
STOP REC
REC MODE
DVD RECORDER
3
Use the CHANNEL +/– buttons to select the TV
channel to record.
The front panel display shows the channel number:
1 1 3 0
Channel number
• While the recorder is stopped, you can also use the
number buttons on the remote to select the channel.
(For channel 6, press 6 then ENTER; for channel 24,
press 2, 4 then ENTER)
• You can also use the front panel controls: Press
FUNCTION repeatedly until the display shows
CHANNEL then use the SMART JOG dial to select
the channel number.
4
If the broadcast audio has a SAP channel (Second
Audio Program), press AUDIO to select the audio
channel to record.
Press repeatedly to switch between Mono, Stereo and
SAP audio channels.
• When recording in VR mode, both mono and SAP
audio channels are recorded, allowing you to switch
the audio channel on playback. The only exception to
this is when the picture quality is set to FINE/MN32,
in which case you do need to select the audio
channel before recording.
5
Press
REC to start recording.
If you want to set a recording time, press the
button repeatedly. The recording time increases in 30
minute increments, up to a maximum of 6 hours. You can
see the recording time on-screen and in the front panel
display. When the recording ends, the recorder
automatically switches into standby if no other operation
is being performed.
• To cancel the set recording time, press
• If you want to pause recording at any time, press
PAUSE. Press again to restart the recording. (If
recording in VR mode, a new chapter is started after
recording restarts)
6
To stop the recording, press
• If you set the recording time in the previous step, you
can still stop the recording anytime by pressing
STOP REC.
• Recording will stop automatically when there is no
more space on the DVD.
7
REC
REC.
STOP REC.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvr-310

Table of Contents