Names And Functions; Front Panel - Pioneer Elite DV-37 Operating Instructions Manual

Names and
Functions

Front Panel

1 2
5 6
1
STANDBY/ON button
Press to switch the player on or to put in standby
(pages 22, 25).
2
STANDBY indicator
Lights when the player is in standby, using a
minimum amount of power to maintain system
settings (pages 22, 25).
3
Disc tray
When loading a disc, place discs in the disc tray with
the label side facing up (pages 22, 25).
4
DVD indicator
Lights when a DVD disc is loaded.
5
PROGRESSIVE SCAN indicator
Lights when unit is outputing 525 line progressive
scan (non-interlaced) video.
6
DNR PRO indicator
Lights when unit is set to DNR PRO (YNR and/or
CNR) (page 43).
7
DIGITAL DATA OFF indicator
Lights when unit is set to Digital Out Off (page 29).
8
FL OFF indicator
Lights when the fluorescent (FL) display is switched
off.
7 8
3
9 0 -
9
Display window
Displays system information (page 10).
0
Remote sensor
Point the remote control toward the remote sensor
to operate the player (page 8).
-
7/0 (stop/open/close) button
Press to open and close the disc tray (pages 22, 25).
Press to stop playback. Pressing once enables
playback to resume from a point shortly before the
location where it stopped. During playback, press
twice to open the disc tray (page 25).
=
4 1 (reverse) button
Press to go back to previous title/chapters/tracks.
Press and hold to perform reverse playback scanning
(pages 24).
~
¡ ¢ (forward) button
Press to advance to title/chapters/tracks. Press and
hold to perform fast-forward scanning (page 24).
!
8 (pause) button
Press during playback to pause. Press again to
resume playback (page 45).
@
3 (play) button
Press to start or resume playback (pages 22, 25).
4
= ~ ! @
9