Line Digital Progressive Scan Compatible Video Output - Pioneer Elite DV-37 Operating Instructions Manual

525 line Digital Progressive
Scan Compatible Video Output
– DVD
Connecting to a progressive scan-
compatible TV
Compared to a standard interlaced TV picture, a
progressive scan TV is capable of stable, flicker-free
images.
Set only if you connected the COMPONENT VIDEO
OUT jacks to a progressive scan-compatible TV or
monitor. For this setting to be effective, the rear panel
COMPONENT VIDEO OUT switch set to 525p (480p)
or MENU SELECT.
When a progressive-scan video signal is output, the
"PROGRESSIVE SCAN" indicator lights on the front
panel.
When the switch is set to MENU SELECT, make
changes to the [Component Video] setting in the Setup
screen Video menu.
Audio1 Audio2
Component Video
On Screen Display – Position-Normal
Angle Indicator – On
Frame Search – Off
Settings: Interlace*
Use this setting with regular TVs that are not
compatible with progressive scan. Check the
TV's instruction manual if you are not sure
about this.
Progressive
Use this setting with TVs and monitors that
have progressive scan component video
inputs. Check the TV's instruction manual if
you are not sure about this.
Auto Progressive
Switches to progressive scan when 16:9
DVD discs are played, 4:3 DVD discs uses
interlace setting. Your TV/monitor must be
compatible with progressive scan to use this
setting.
Tip:
If this player is set to output progressive-scan video, it's
possible that the picture will appear stretched when playing
discs recorded in 4:3 format. This happens when the TV's
aspect ratio is set at 16:9. To see the picture in its correct
aspect ratio, change the TV setting to 4:3.
If your TV can be switched between 4:3 and 16:9, set this
player to [Interlace].
32
Video Language General
TV Screen – 16:9(Wide)
Interlace
S-Video Out -
Progressive
Still Picture - Auto Auto Progressive
Move SETUP Exit
*
Factory setting
Note
If you connect a TV that is not compatible with a
progressive scan signal and choose one of the
progressive scan settings, you will not be able to see any
picture at all.
Set the rear panel COMPONENT VIDEO OUT switch to
the 525i(480i) position.
Compatibility of this unit with progressive-scan TVs.
'CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 525 PROGRESSIVE SCAN
PICTURE PROBLEMS, IT IS RECOMMENDED THAT
THE USER SWITCH THE CONNECTION TO THE
"STANDARD DEFINITION" OUTPUT. IF THERE ARE
QUESTIONS REGRADING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER
SERVICE CENTER.'
"525P DVD PLAYER is compatible with the
following Pioneer displays and monitors."
PLASMA DISPLAY
•PDP-505HD •PDP-502MX
PROJECTION MONITOR RECEIVER
•Pro-700HD •Pro-710HD
•Pro-510HD •SD-641HD5
•SD-532HD5
•Pro-610HD
•SD-582HD5