Pioneer Elite DV-37 Operating Instructions Manual page 14

¶
TV CONTROL buttons
FUNC: Press FUNC to select the TV for
remote control operation.
CHANNEL: Use to select TV channel.
VOLUME: Use to adjust the volume.
•
TV button
Press TV to turn the TV's power on or put in
standby.
Setting up the Remote Control to TV.
1. Input the Manufacturer code.
While holiding down the CLEAR button, input the
two digit code from the table below that
corresponds to the make of your TV.
For example, If you have a Pioneer TV, press and
hold CLEAR, then press 0, 0 on the remote
control.
2. Confirm that the TV is responding to the
programmed code.
On the remote, press the
swithches on (or into standby if it was on
previously), then you have the correct code.
If nothing happens when you press the
button, start again from step 1 using a different
code.
• Some Manufacturer have several codes. Try
each one until you find the one that works.
Preset Code List
Code Manufacturer
00 PIONEER 1
01 RCA 1
02 SHARP 3
03 ZENITH 1
04 SONY
05 TOSHIBA 1
06 HITACHI 1
07 PHILIPS
08 PANASONIC 1
09 MITSUBISHI
10 GOLDSTAR 1
11 GE 1
12 MAGNAVOX 1
13 JVC 1
14 SANYO 2
15 RCA 2
16 RCA 3
17 RCA 4
14
TV button. If the TV
TV
Code Manufacturer
18 RCA 5
19 SHARP 1
20 ZENITH 2
21 SANYO 1
22 PANASONIC 2
23 GOLDSTAR 2
24 HITACHI 2
25 HITACHI 3
26 TOSHIBA 2
27 SHARP 2
28 GE 2
29 MAGNAVOX 2
30 TOSHIBA 3
31 HITACHI 4
32 JVC 2
33 FUJITSU
34 PIONEER 2
35 GRANDIENTE