Audio Connections - Pioneer Elite DV-37 Operating Instructions Manual

Audio Connections

This player features two digital (optical and coaxial) and
also analog audio output formats.
Digital Audio Connections:
You can enjoy the digital audio recorded on discs from
both optical digital and coaxial digital output jacks.
When making digital audio connections, do not
make connections from both the coaxial and optical
digital outputs to the same component.
When a DVD recorded in Dolby Digital, DTS, or MPEG is
loaded, noise will be output if you have made
connections via the digital audio jacks to a receiver or
amplifier that cannot decode a Dolby Digital, DTS, or
MPEG digital bitstream. In this case, be sure to set up
the Setup Navigator audio settings to best reflect the
type of system you are using (page 21). Additionally, the
digital audio settings can be adjusted manually in the
Setup screen Audio 1 menu (pages 28–29).
DIGITAL OUT (Optical)
The digital signal is transmitted as light pulses through a
fiber-optic cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a fiber-optic cable (not supplied) to connect the
DIGITAL OUT OPT (digital optical output) on the
player to the digital optical input on an AV amplifier or
receiver.
CONTROL DIGITAL OUT
OUT IN
OPT COAX
DIGITAL OUT
OPT
COAX
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
16
Y P P
B R
525i 525p
(480i) (480p)
MENU
1 2 1 2
SELECT
COMPONENT VIDEO OUT S-VIDEO OUT VIDEO OUT
AC IN
AUDIO OUT
R L
2 2
1 1
DIGITAL IN
DIGITAL OUT (Coaxial)
The digital signal is transmitted electronically through a
coaxial cable.
• Use to connect to an AV amplifier or receiver with
built-in Dolby Digital, DTS, or MPEG decoder.
• Use a coaxial cable (not supplied) to connect the
DIGITAL OUT COAX (coaxial digital output) on the
player to the coaxial digital input on an AV amplifier or
receiver.
Y P
B
525i 525p
(480i) (480p)
MENU
SELECT
COMPONENT VIDEO OUT
AUDIO OUT
R
CONTROL DIGITAL OUT
2
OUT IN
1
OPT COAX
DIGITAL OUT
OPT
COAX
AV amplifier or receiver with
built-in Dolby Digital, DTS, or
MPEG decoder
Analog Audio Connection:
AUDIO OUT
• Make analog audio connections to a stereo amplifier
or receiver.
• Analog audio connections can also be made to a TV or
monitor with stereo input jacks.
• Use the supplied audio cord to connect the AUDIO
OUT on the player to the audio input on the stereo
amplifier or receiver.
• When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
Y
525i 525p
(480i) (480p)
MENU
SELECT
COMPONENT VIDEO OUT
AUDIO OUT
R
CONTROL DIGITAL OUT
2
OUT IN
1
OPT
COAX
AUDIO OUT
R L
2 2
1 1
(Included)
P
R
1 2 1 2
S-VIDEO OUT VIDEO OUT
AC IN
L
2
1
DIGITAL IN
P P
B R
1 2 1 2
S-VIDEO OUT VIDEO OUT
AC IN
L
2
1
AUDIO IN
R L
Stereo amplifier or receiver