Status Display - Westinghouse Premium WGRT 199 Series Installation, Start-Up, Maintenance, Parts, Warranty

E. Status Display
Status Display will activate when button
Figure 51 - Status Display Screens
Display Display
(Main Menu) (Sub Menu)
A:GA or A:LI
b:Fr
C:Lc
d:oP
E:dH
F:Eh
h:In
1:PH
2:rh
3:rH
L:rt
4:It
5:IH
J:AG
Table 29 - Status Display Screen Descriptions
Turn the dial counterclockwise and clockwise to scroll through the displayed parameters. To view parameter details, press the
button at the appropriate screen. Press the
Press the button again to return to Operation Mode.
To turn on Lock Mode, press the
the button to save the selection and return to the parameters.
Press the button again to return to Operation Mode.
NOTE: The control system will not allow the changes if Lock Mode is activated. Lock Mode will have to be turned off before making further
changes.
is pressed and held for five seconds at Standby Mode.
Detail
Flow Unit
Fan Speed (RPM)
Lock Mode
Heat exchanger operating temperature
DHW outlet water temperature
Exhaust temperature
Inlet water temperature
Power supply
Burner operating time
Burner Burner operating time
Operation Time
Ignition attempts
Ignition attempts
AGM Value Correction
or buttons to leave the parameter.
button at the C:Lc parameter. Turn the dial
Description
Current Flow Unit (LI: Liters/min, GA: Gallons/min)
Current Fan Speed (RPM)
Lock Mode is In Use (On) or Unused (Off )
Allows user to lock out any temperature change
Current heat exchanger operating temperature
Current DHW outlet temperature
Current exhaust temperature
Current inlet water temperature
Time water heater has been powered in 100
Time burner has operated in 1 hour units
L:rt on display Time burner has operated in 1000 hour units
on sub menu
Number of ignition attempts: 10 times the
Number of ignition attempts: 10,000 times
the displayed unit
AGM Value Correction Range: -50 to 50
Default: 00
counterclockwise and clockwise to scroll On or Off. Press
whl-004 Rev. 000 Rel. 013 Date 5.1.18
51
hour units
displayed unit