11.10
Installing the lower triple clamp
Main work
–
Remove screw
–
Remove screw
–
Take off the upper triple clamp with the handlebar and hang
them to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
K01149-10
–
Remove O-ring
–
Take off the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
M01117-10
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
Slide on protective ring
102146-10
–
Position the upper triple clamp with the handlebar.
–
Mount screw
K01150-10
SERVICE WORK ON THE CHASSIS 11
1
.
2
.
3
. Remove protective ring
p. 143)
1
2
3
and O-ring
4
, but do not tighten yet.
4
.
is correctly posi-
.
53