–
Now inject the liquid into the system until it emerges from the
6
drill hole
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
L01223-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
SERVICE WORK ON THE CHASSIS 11
of the master cylinder without bubbles.
4 mm (0.16 in)
79