Selecting The Menu Language - Pioneer AVH-P2300DVD Owner's Manual

Menu operations
2 Display the system menu.
Refer to Introduction of menu operations on
page 45.
3 Touch Rear Speaker on the system
menu.
4 Touch Rear Speaker to switch the sub-
woofer output or full-range speaker.
5 Touch Preout to switch the subwoofer
or rear output.
Notes
! Even if you change this setting, there will be
no output unless you turn the subwoofer out-
put on (refer to Using subwoofer output on
page 47).
! If you change this setting, subwoofer output
in the audio menu will return to the factory
settings.
Switching sound muting/
attenuation
Sound from this system is automatically
muted or attenuated when a signal from
equipment with a mute function is received.
! Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Display the system menu.
Refer to Introduction of menu operations on
page 45.
2 Touch Mute/ATT until the desired set-
ting appears.
Touch Mute/ATT until the desired setting ap-
pears in the display.
! Mute – Muting
! ATT -20dB – Attenuation (ATT -20dB has a
stronger effect than ATT -10dB)
! ATT -10dB – Attenuation
! Off – Turns the sound muting/attenuation
off
Notes
! When Mute is displayed, the sound is turned
off and no audio adjustments can be made.
! When ATT is displayed, the sound is attenu-
ated and no other audio adjustments can be
made.
! Operation returns to normal when the phone
connection is ended.

Selecting the menu language

The menu language can be selected from four
languages.
If text information such as the title name, artist
name or a comment is embedded in a Eur-
opean language, they can also be displayed
on this unit.
! The language can be changed for the fol-
lowing:
— System menu
— Video Setup
— On-screen display
— Multi language setting for DivX
— Language for cautions
Some operations on this unit are prohib-
ited from use while driving or require
careful attention when operated. In
such cases, a caution will appear on the
display. You can change the language
for caution messages with this setting.
! If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
! Some characters may not be displayed
properly.
! To complete this operation, switch the igni-
tion key off and on after you set this set-
ting.
1 Display the system menu.
Refer to Introduction of menu operations on
page 45.
2 Touch System Language on the system
menu to select the desired language.
3 Touch the desired language.
English (English)—Français (French)—
Español (Spanish)—Português (Portuguese)
Section
13
53
En