Pioneer AVH-P2300DVD Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Car Receiver
  5. AVH-P2300DVD
  6. Service manual

Pioneer AVH-P2300DVD Service Manual

Dvd rds av receiver
Hide thumbs Also See for AVH-P2300DVD:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual
DVD RDS AV RECEIVER
AVH-P2300DVD
AVH-2350DVD
AVH-2350DVD
AVH-2350DVD
AVH-2390DVD
This service manual should be used together with the following manual(s):
Model No.
Order No.
CX-3250
CRT4300
For details, refer to "Important Check Points for Good Servicing".
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2011
Mech.Module
LS1
DVD Mech. Module : Circuit Descriptions, Mech. Descriptions, Disassembly
1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan
AVH-P2300DVD/XNUC
/XNRC
/XNRD
/XNRI
/XNID
Remarks
ORDER NO.
CRT4681
/XNUC
K-ZZZ JAN. 2011 Printed in Japan

Advertisement

Table of Contents
loading

Related Manuals for Pioneer AVH-P2300DVD

Summary of Contents for Pioneer AVH-P2300DVD

  • Page 1 PIONEER CORPORATION 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2011 K-ZZZ JAN.

  • Page 2: Safety Information

    The AEL (accessible emission level )of the laser power output is less than CLASS 1 but the laser component is capable of emitting radiation exceeding the limit for CLASS 1. A specially instructed person should do servicing operation of the apparatus. AVH-P2300DVD/XNUC...
  • Page 3 CAUTION Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacture. Discord used batteries according to the manufacture's instructions. AVH-P2300DVD/XNUC...
  • Page 4 To protect products from damages or failures during transit, the shipping mode should be set or the shipping screws should be installed before shipment. Please be sure to follow this method especially if it is specified in this manual. AVH-P2300DVD/XNUC...

  • Page 5: Table Of Contents

    10.8 KEYBOARD PCB ..........................136 10.9 MONITOR PCB (GUIDE PAGE)......................138 10.10 WAVEFORMS.............................144 11. PCB CONNECTION DIAGRAM ........................146 11.1 MOTHER PCB ............................146 11.2 INTERFACE PCB ..........................150 11.3 DVD CORE UNIT..........................152 11.4 CONNECT PCB............................154 11.5 KEYBOARD PCB..........................156 11.6 MONITOR PCB.............................158 12. ELECTRICAL PARTS LIST.........................162 AVH-P2300DVD/XNUC...

  • Page 6: Service Precautions

    How to enter : Press RESET while pressing [FORWARD] and [EJECT] keys together. How to exit : Same procedure to enter this mode. 11. When EEPROM is initialized, eject lock may be enabled. Please cancel eject lock in this case. AVH-P2300DVD/XNUC...
  • Page 7 Compared with eutectic solders, lead-free solders have higher bond strengths but slower wetting times and higher melting temperatures (hard to melt/easy to harden). The following lead-free solders are available as service parts: Parts numbers of lead-free solder: GYP1006 1.0 in dia. GYP1007 0.6 in dia. GYP1008 0.3 in dia. AVH-P2300DVD/XNUC...

  • Page 8: Specifications

    2. SPECIFICATIONS 2.1 SPECIFICATIONS AVH-P2300DVD/XNUC General Phase ........Normal/Reverse Power source......14.4 V DC (10.8 V to 15.1 V Bass boost: allowable) Gain ........+12 dB to 0 dB Grounding system....Negative type DVD Player Maximum current consumption .............10.0 A System ..........
  • Page 9 Frequency range...... 531 kHz to 1 602 kHz (9 kHz) 530 kHz to 1 640 kHz (10 kHz) Usable sensitivity..... 25 μV (S/N: 20 dB) Signal-to-noise ratio....62 dB (IEC-A network) Note Specifications and the design are subject to mod- ifications without notice. AVH-P2300DVD/XNUC...
  • Page 10 Usable sensitivity..... 25 μV (S/N: 20 dB) Gain ........+6 dB to –24 dB Signal-to-noise ratio....62 dB (IEC-A network) Phase ........Normal/Reverse Bass boost: Note Gain ........+12 dB to 0 dB Specifications and the design are subject to mod- ifications without notice. AVH-P2300DVD/XNUC...

  • Page 11: Disc/Content Format

    Use to connect an auxiliary device. SRC/OFF CAUTION Use an optional Pioneer USB cable (CD-U50E) to connect the USB audio player/USB mem- ory as any device connected directly to the unit will protrude out from the unit and may be dangerous.

  • Page 12: Remote Control

    DVD playback. Press to go to the next REAR SRC Not used. track (chapter). Press to stop play- back. Press to select the next/previous disc/ folder. (FOLDER/P.CH) Press to recall radio station frequencies as- signed to preset tun- ing keys. AVH-P2300DVD/XNUC...

  • Page 13: Connection Diagram

    2.4 CONNECTION DIAGRAM AVH-P2300DVD/XNUC...
  • Page 14 AVH-P2300DVD/XNUC...
  • Page 15 AVH-P2300DVD/XNUC...

  • Page 16: Basic Items For Service

    For check items concerning image and voice, please refer to the followings: Check items concerning image Check items concerning voice Block-noise Distortion Crosscut noise Noise Dot noise Low volume Distorted image (Image skip) High volume Low brightness Changes in level Too bright Pause of sound Color fading Partial discoloration AVH-P2300DVD/XNUC...

  • Page 17: Pcb Locations

    3.2 PCB LOCATIONS DVD Core Unit Connect PCB Interface PCB Keyboard PCB Monitor PCB Mother PCB A:AVH-P2300DVD/XNUC Unit Number : CXX3006(A) Unit Number : CXX3022(A) B:AVH-2350DVD/XNRC : CXX3007(B) : CXX3023(B) C:AVH-2350DVD/XNRD : CXX3008(C) : CXX3024(C) : CXX3025(D) D:AVH-2350DVD/XNRI : CXX3009(D)

  • Page 18: Jigs List

    Skew adjustment (1530:produced by THREE BOND) 3.4 CLEANING Before shipping out the product, be sure to clean the following portions by using the prescribed cleaning tools: Portions to be cleaned Cleaning tools DVD pickup lenses Cleaning liquid : GEM1004 Cleaning paper : GED-008 AVH-P2300DVD/XNUC...
  • Page 19 AVH-P2300DVD/XNUC...
  • Page 20 VIDEO_GND COMPOSIT AGND DVD MECHA MODULE ANALOG_LOUT AGND (LS1) MOTH ANALOG_ROUT AGND STANBY SLVSTS HSTCMD IRQPWR MOTH XRESET AMUTE PGND PGND MOTH PGND CN701 VKN1612-A CN3501 VKN1612-A KEYBOARD PCB CN3502 JA3501 YKS5032-A CKN1084-A CN5280 CKS5561-A AUX INPUT TOUCH PANEL AVH-P2300DVD/XNUC...
  • Page 21 VKN1620-A CKX1070-A JA121 JA101 CKB1085-A CKB1099-A MOTHER PCB MOTHER PCB (ANALOG PART) MOTHER PCB (SYSTEM PART) MOTHER PCB (POWER SUPPLY PART) MOTHER PCB (IN/OUT PART) CN801 CKS5708-A CN5601 CKS5708-A MONITOR PCB CN5700 CN5600 CKS5561-A CKS5708-A LCD MODULE BACK LIGHT AVH-P2300DVD/XNUC...

  • Page 22: Block Diagram

    WIRED WIRED WIRED REMOTE GNDD CN2502 RGBARI ONSEI+ ONSEI+ ONSEI+ GUIDEON S_to_N ONSEI- ONSEI- ONSEI- Q601 N_to_S TVON TVON TVON RGBARI ASENBO GION GUIDEON GUIDEON GUIDEON SYSTONAVI SYSTONAVI SYS_TO_NAVI S_to_N NAVI INTERFACE NAVITOSYS NAVITOSYS NAVI_TO_SYS N_to_S CCSYNC CSYNC CSYNC AVH-P2300DVD/XNUC...
  • Page 23 REMIN P.B. PBSENS RESET TELMUTE Q151 (1/2) MUTE TELMUTEIN AVSCK ISENS AVSDATA Q155 ISENS BGSENS Q154 BGSENS BGSENS Q752 :AVH-P2300DVD/XNUC TO 2/2 PNLXV :AVH-2350DVD/XNRC Q753 :AVH-2350DVD/XNRD ASENBO PNLYV :AVH-2350DVD/XNRI Q751 :AVH-2390DVD/XNID PNLADCRT TXIE CN801 PLXV RXIE PLYV PNLVD ADVX PNLADX...
  • Page 24 VDD33V REG. IC1001 S-1142B33I-E6 BUP_1 VOUT VDD33 VDCNT5 TO 1/2 ON/OFF HSD2 SYS+B IC1021 NJM2388F84 VOUT SYS+B CONTROL VCC33 REG. :AVH-P2300DVD TUN5V REG. IC1061 IC1041 S-1172B34-E6 :AVH-2350DVD/X NJM2846DL3-05 :AVH-2350DVD/X VOUT VCC33 SYS+B VOUT TUN5 ON/OFF CONTROL :AVH-2350DVD/X :AVH-2390DVD/X KEYBOARD PCB...
  • Page 25 P1082 Q1201 P1151 PWRBL P1081 Q1202 :AVH-P2300DVD/XNUC TO 1/2 :AVH-2350DVD/XNRC :AVH-2350DVD/XNRD :AVH-2350DVD/XNRI :AVH-2390DVD/XNID AVH-P2300DVD/XNUC...
  • Page 26 COIL_W CONT1 COIL W CTL1 CONT1 CONT2 CTL2 CONT2 HUP(HU+),HUM(HU-) HUP(HU+),HUM(HU-) FCO+ HVP(HV+),HVM(HV-) HVP(HV+),HVM(HV-) FCO- TKO- TKO+ HWP(HW+),HWM(HW-) HWP(HW+),HWM(HW-) HALL BIAS- HALL_BIAS- HALL BIAS+ HALL_BIAS+ VCC5 HOME S101 HOME HOME HOME S102 8SNS 08EJ 12cm S103 DSCSNS 12cm(DSCSNS) 12EJ AVH-P2300DVD/XNUC...
  • Page 27 VREF DVDMPD VCC5 LDIN TEMP F+H_G+H F+H/G+H RFINP CONT1 E+G_E+F E+G/E+F CONT2 Q1102 Q1104 LPCO2 78LD Q1101 Q1103 LPCO1 65LD VREFH VREF VIN1 VIN2 VIN4 PU (DP10) VIN3 VIN6 VIN5 HOME CDMPD 78MD DVDMPD 65MD 08EJ TEMP VDSENS 12EJ AVH-P2300DVD/XNUC...
  • Page 28 CN801 VOUT PWRBL RGBVI IC5480 ON/OFF TC7SHU04FUS1 LCDICLK GD1.2V REG. X5480 BLCLK IC5211 9.597MHz PQ1LA125MSPQ VCC33 DIMPL GD12V 64M FLASH IC5320 TEMP :CWW2982 :CWW2980 BLERR1 :CWW2983 :CWW2981 MBLPW BLSYNC BLCLK RESET DIMMER DIMPLS TEMPSEN1 TEMP1 PLYV PLXV ADVX ADVY AVH-P2300DVD/XNUC...
  • Page 29 LCD BACKLIGHT DRIVER IC5701 BLERR1 TK61222CQ6 Q5701 MBLPW Q5700 FAULT LINE4 LED1 LCD BACKLIGHT LINE3 VREG LED2 LINE2 IC5700 LED3 TC7SET08FUS1 LINE1 LED4 BLCLK Q5702 DIMPLS TEMP1 TEMP :AVH-P2300DVD/XNUC :AVH-2350DVD/XNRC :AVH-2350DVD/XNRD :AVH-2350DVD/XNRI :AVH-2390DVD/XNID CN5280 PLYV PLXV TOUCH PANEL ADVX ADVY AVH-P2300DVD/XNUC...

  • Page 30: Diagnosis

    (UC Only) DDCCLK <- Clock Out DDCCLK : Pin6 (Frequency of 413.9 kHz) VD5 : Pin93 VD5, 8 <- H VD8 : Pin94 Starts Communication with Display microcomputor Source Keys operative Source ON SYSPW : Pin107 SYSPW <- H AVH-P2300DVD/XNUC...

  • Page 31: Inspection Method Of Pickup Unit

    Perform lens Is it OK? cleaned? cleaning Replace the PICK UP Check point: Error rate check Error rate check PICK UP Perform lens Is it OK? cleaned? cleaning Replace the PICK UP Ckeck parts Finished other than PICK UP AVH-P2300DVD/XNUC...
  • Page 32 60 - 390 (mV) 10 - 65 (mA) Expansion Remarks: LD current NO. Disc Check Point Threshold TCD-782 CDLD1-VCC5_3 60 - 360 (mV) 10 - 60 (mA) Expansion Notes: Please pay attention to the laser diode damage by static electricity. AVH-P2300DVD/XNUC...
  • Page 33 GGV1025 ID: 40000 1.000E-03 less than GGV1025 ID: 200000 1.000E-03 less than TCD-782 ID: HOME Position 2.500E-03 Test mode display will not appear on the display of this product. Connect the rear monitor output to a monitor. AVH-P2300DVD/XNUC...

  • Page 34: Diagnosis Flowchart

    5.3 DIAGNOSIS FLOWCHART AVH-P2300DVD/XNUC...
  • Page 35 <Check> Check the voltage at the “STANBY” test point while the power is on. Use the “DGND1” test point at the reference. Specification value Check point Module No. Unit STANBY-DGND1 VCC33 V- 0.6 V or more Side A DGND1 STANBY Fig 1.1: STANBY check point AVH-P2300DVD/XNUC...
  • Page 36 Unit 1 VDD5_1 - DGND1 5.0 ± 0.4 2 VCC33_1 - DGND1 3.3 ± 0.15 3 VCC12_1 - DGND1 1.2 ± 0.12 Side A VCC33_ 1 VCC12_ 1 DGND1 VDD5_ 1 Fig 2.2: VDD5, VCC33, VCC12 voltage check points AVH-P2300DVD/XNUC...
  • Page 37 <Check> Check the voltage at the “XRES” test point while the power is on. Use the “DGND1” test point at the reference. Check point Module No. Specification value Unit 1 XRES-DGND1 VCC33 × 0.7 or more Side A DGND1 NRES Fig 3.1: RESET check point AVH-P2300DVD/XNUC...
  • Page 38 <Check> Check the voltage at the “VSENS” test point while the power is on. Use the “DGND1” test point at the reference. Specification value Check point Module No. Unit 1 VSENS - DGND1 0.95 - 1.07 VD8 = 8.0 ± 0.4 V Side A VSENS DGND1 Fig 4.2: VSENS check point AVH-P2300DVD/XNUC...
  • Page 39 Specification value Check point Module No. Unit 27 MHz 2 IC1501 169pin ± 50 ppm Specification value Fig 5.2: Clock specification value Side A IC1501 158pin DGND1 Fig 5.3: 27 MHz check point AVH-P2300DVD/XNUC...
  • Page 40 Be careful as XCSM, XWE, XCAS and XRAS of IC1480 are called differently in IC1501, namely NCSM, NWE, NCAS, NRAS. IC1501 MA0 - 11 1480 DV5U MDQ0 - 15 SDRAM XWE(NWE) XCAS(NCAS) XRAS(NRAS) XCSM(NCSM) DQM0 DQM1 Fig 6.1: SDRAM I/F AVH-P2300DVD/XNUC...
  • Page 41 XCSM DQM0 IC1480 15pin IC1501 179pin 56 ohm ± 5 % IC1480 39pin IC1501 180pin 56 ohm ± 5 % DQM1 IC1501 193pin IC1480 20pin 56 ohm ± 5 % IC1480 21pin IC1501 197pin 56 ohm ± 5 % AVH-P2300DVD/XNUC...
  • Page 42 Side B Check point 1 (IC1480) Side A Check point 2 (IC1501) Fig 6.2: SDRAM I/F check point AVH-P2300DVD/XNUC...
  • Page 43 Check point Module No. Specification value Unit VD8_1 - PGND3 8.0 ± 0.4 VD - PGND3 8.0 ± 0.4 VCC5_1- AGND1 5.0 ± 0.1 Side A AGND3 VCC5_ 1 PGND1 VD8_ 1 PGND3 Fig 7.2: VD8, VCC5 voltage check points AVH-P2300DVD/XNUC...
  • Page 44 Check with PGND and GNDAU being the reference. Check point Module No. Specification value Unit VD - PGND_3 8.0 ± 0.4 AVCC5 - GNDAU1 5.0 ± 0.1 Side A AVCC5 PGND3 GNDAU1 Fig 8.2: VD8, AVCC5 voltage check points AVH-P2300DVD/XNUC...
  • Page 45 Specification value 3 DACCK 2.0 V~VCC33 V DGND~0.8 V 36.864 0 MHz ± 300 ppm 33.868 8 MHz ± 300 ppm DACCK 2.0 V~VCC33 V DGND~0.8 V Specification value 1 Specification Specification value 2 value 3 Fig 9.2: Clock specification value AVH-P2300DVD/XNUC...
  • Page 46 Side B Check point 1 (DACCK stylus) Side A Check point 2 (IC1501 148 pin) DGND2 Fig 9.3: 27 MHz, DACCLK check point AVH-P2300DVD/XNUC...
  • Page 47 Waveform 1 SRCK VCC33 V-0.6 V or higher 0.4 V or lower Waveform 2 LRCK VCC33 V-0.6 V or higher 0.4 V or lower Waveform 3 Specification value 2 Specification value 1 Fig 10.2: Serial 3 lines specification value AVH-P2300DVD/XNUC...
  • Page 48 Side A DGND2 ADOUT LRCK Side B SRCK Fig 10.3: Serial 3 lines check points AVH-P2300DVD/XNUC...
  • Page 49 GNDAU1 Fig 10.5: Analog audio out check point Check with DGND being the reference. Specification value 2 Check point 1 (stylus) Specification value 1 Reference waveform 6 IEC VCC33 V-0.6 V or higher 0.4 V or lower Waveform 5 AVH-P2300DVD/XNUC...
  • Page 50 Side A IEC DGND2 Fig 10.6: Digital audio signal (IECOUT) check point AVH-P2300DVD/XNUC...
  • Page 51 In case of NG, check the applicable line, the periphery of the major components in the drawing above, soldering of the peripheral components and defective components. PEAK Reference COMPOSITE signal value Color burst Pedestal level BOTTOM Horizontal sync signal Fig 11.2: Waveform for the case of composite white 100% output AVH-P2300DVD/XNUC...
  • Page 52 Side A COMPOSITE GNDV Fig 11.3: VIDEO signal check point AVH-P2300DVD/XNUC...
  • Page 53 (Refer to the FE test mode for the method of displaying the LD energizing time.) 2.If the second digit from the left of the energizing time display is showing E, such as “ E ”, it means that the flash memory has reached its life. Example: 0E000BB8 AVH-P2300DVD/XNUC...
  • Page 54 In case of NG, check the applicable line, periphery of IC1501, soldering of the peripheral components and defective components. Specification value Check point Module No. Unit 48 MHz 2 IC1501 50pin-DGND1 ± 50 ppm Specification value Fig 13.2: Clock specification value AVH-P2300DVD/XNUC...
  • Page 55 Side A IC1501 50pin DGND1 Fig 13.3: 48 MHz check point AVH-P2300DVD/XNUC...
  • Page 56 1.USB Memory: Play a song from USB memory and check D+ and D- with the DGND standards. 2.iPod: Connect iPod and check CP_RESET, SDA and SCL with the DGND standards until the pioneer log appears. Play a song from iPod and check D+/D- with the DGND standards.
  • Page 57 Side A SDATA CP_ RESET SCLOCK DGND2 AVH-P2300DVD/XNUC...
  • Page 58 -> -> Waveform 1 Waveform 4 CH1:SRCK CH1:IECOUT Reference voltage: DGND2 1 V/div. 5 usec/div Reference voltage: DGND2 1 V/div. 500 nsec/div G-> G-> Waveform 2 Waveform 5 CH1:LRCK Reference voltage: DGND2 1 V/div. 5 usec/div G-> Waveform 3 AVH-P2300DVD/XNUC...
  • Page 59 VIDEO [WHITE 100IRE] CH1:COMPO Reference voltage: GNDV1 200 mV/div. 10 usec/div Waveform 6 USB memory USB memory USB memory Reference voltage:DGND 1 ms/div 2 V/div Reference voltage:DGND 200 ns/div 2 V/div Waveform 7 Waveform 8 AVH-P2300DVD/XNUC...
  • Page 60 Reference voltage:DGND 200 ns/div 2 V/div Waveform 9 Waveform 10 iPod iPod Reference voltage:DGND 2 ms/div 1 V/div Reference voltage:DGND 20 ms/div 1 V/div CP_RESET DGND NRES Waveform 11 Waveform 12 iPod Reference voltage:DGND 500 us/div 1 V/div Waveform 13 AVH-P2300DVD/XNUC...

  • Page 61: Error Code List

    ERROR-02-A2 "ERROR02-A2" A2h L0 adjustment is NG Adjustment of L1 is NG ERROR-02-A3 "ERROR02-A3" A3h L1 adjustment is NG LD system NG ERROR-02-A4 "ERROR02-A4" A4h LD system NG Gain adjustment system NG ERROR-02-A5 "ERROR02-A5" A5h Gain adjustment system NG AVH-P2300DVD/XNUC...
  • Page 62 The time for the generation is the time set by the audio property notice wait time set by the connection confirmation command. *10 It is generated when the DRM information update notice is sent from DVD mecha and the response of DRM information update is not returned. AVH-P2300DVD/XNUC...
  • Page 63 USB memory memory and do consumes more not use it. Turn the than maximum ignition switch to allowable cur- OFF, then to ACC rent. or ON and then connect a compli- ant USB portable audio player/USB memory. AVH-P2300DVD/XNUC...
  • Page 64 Bluetooth switch OFF and module of this then to ACC or ON. unit. If the error mes- sage is still dis- played after performing the above action, please contact your dealer or an authorized Pioneer Service Station. AVH-P2300DVD/XNUC...

  • Page 65: Connector Function Description

    7. FL+ 15. GND 8. ASENBO 18 : NC 9 : ASENBO 8. RL+ 16. B.UP 9. BUSR+ 10. BUSR- REAR CAMERA IN 11. BUSL- (AVH-P2300DVD/XNUC) REAR OUTPUT or VIDEO VIDEO WIRED REMOTE SUBWOOFER INPUT OUTPUT CONTROL OUTPUT ANTENNA IN...

  • Page 66: Service Mode

    Choose "Version Check" among the monitor test mode menu screen. [Display specifications] When 8 digits of read number is strange, displayed with red. [Operation specification] Operational description Remote controller key Return to test mode mene Page up Page down AVH-P2300DVD/XNUC...
  • Page 67 In case the EEPROM initialization has been performed. In case the adjustment value has been initialized. Calibration inspection : In case the calibration inspection has never been performed. In case the EEPROM initialization has been performed. In case the adjustment value has been initialized. AVH-P2300DVD/XNUC...
  • Page 68 X/Y information of [MIN] and [MAX] of the outermost circumference are displayed. [BEFOR] indicates the value stored in the EEPROM. [AFTER] indicates MIN/MAX of the A/D value currently captured. [Operation specification] Operational description Remote controller key Return to top mene AVH-P2300DVD/XNUC...
  • Page 69 Order of display of the locations to be pressed. This point is intended to end the calibration inspection, and therefore, the corrected value of this point is not obtained. [Operation specification] Operational description Remote controller key Return to top mene AVH-P2300DVD/XNUC...
  • Page 70 : The coordinate (X direction, Y direction) which is the result of adding the correction by calibration to the normalized coordinate is displayed. 16 calibration points "+" are displayed in white. [Operation specification] Operational description Remote controller key Return to top mene AVH-P2300DVD/XNUC...
  • Page 71 The incorrect touch will make the characters of cursor turn red. Repeat this for 4 points, and “OK” is displayed upon the last press of 4th point. [Display specifications] confirming The pushing order [Operation specification] Operational description Remote controller key Return to top mene AVH-P2300DVD/XNUC...
  • Page 72 When the adjusted value has been initialized (Data initialize). When the EEPROM has been initialized. [Operation specification] Operational description Remote controller key Selection cursor up movement Selection cursor down movement Return to test mode mene Menu enter AVH-P2300DVD/XNUC...
  • Page 73 When normally ends, "success" is displayed. When will not end in four seconds, judged to be abnormal, "failure" is displayed. [Operation specification] Operational description Remote controller key Selection cursor left movement Selection cursor right movement Return to test mode mene Menu enter AVH-P2300DVD/XNUC...
  • Page 74 [MONOCHROME STRIPE] Display of monochrome stripe signal (1dot Width) [Operation specification] Operational description Remote controller key Return to test mode mene [COLOR BAR] Display of color bar signal [Operation specification] Operational description Remote controller key Return to test mode mene AVH-P2300DVD/XNUC...
  • Page 75 Display of Black/White signal [Operation specification] Operational description Remote controller key Return to test mode mene Next signal [CENTER MARKER] Display of signal for screen central location setting. [Operation specification] Operational description Remote controller key Return to test mode mene AVH-P2300DVD/XNUC...

  • Page 76: Dvd Test Mode

    In order to F close after focus search (S character measurement mode), set to Power_OFF first then power on again FEMIN level before F close. ASMAX level ENVMAX level FE normalization coefficient Spindle gain coefficient TEMAX level indication TEMIN level indication AVH-P2300DVD/XNUC...
  • Page 77 Designation of digit by command (1) and (2). UP/DOWN of numbers by command (3) and (4). Fix by command (5). Error occurrence at Power_OFF [Note] If an error occurs at Power_OFF, reset cannot be made. In such a case, it is necessary to turn the power off and start the test mode once again. Error display AVH-P2300DVD/XNUC...
  • Page 78 [Note] If the power on time is 999999 hours or more, it is always reported as 999999 hours. [Note] If the power on time is “*E** ****”, the value may not be correct due to the life of the flash memory. AVH-P2300DVD/XNUC...
  • Page 79 2: DVD Dual Layer Completion 3: CD 5 Return select 4: CD-RW CRG moves 5: Return to the most outer <Error> ERROR 1: Power OFF select Code : 00000000 Please Input Number <Error : Power OFF> ERROR Code : 00000000 Please Reset AVH-P2300DVD/XNUC...
  • Page 80 Removing the Monitor PCB (Fig.4) Disconnect the two FFC. Remove the five screws and then remove the Monitor PCB. Fig.4 Monitor PCB Removing the Keyboard PCB (Fig.5) Keyboard PCB Remove the screw and then remove the Keyboard PCB. Fig.5 AVH-P2300DVD/XNUC...
  • Page 81 Remove the two screws. Remove the three screws and then remove the Heat Sink and Holder. Fig.7 Removing the the Upper Chassis (Fig.8, 9) Upper Chassis Fig.8 Remove the four screws and then remove the Upper Chassis.(Fig.9, 10) Fig.9 AVH-P2300DVD/XNUC...
  • Page 82 Removing the Service Unit (Mother Assy) (Fig.10) Service Unit (Mother Assy) Remove the three screws. Straighten the tabs at two locations indicated. Remove the two screws and then remove the Service Unit (Mother Assy). Fig.10 AVH-P2300DVD/XNUC...
  • Page 83 How to have it 1.Have a specified part. Handling OK Handling NG AVH-P2300DVD/XNUC...
  • Page 84 (Precaution) If the PU goes to the outer most periphery, it idles. It is not a problem, but please try not to let it idle as much as possible. GND the brown line 4V to the gray line Fig. 1 Fig. 2 Relay FFC Connector (relay FFC) AVH-P2300DVD/XNUC...
  • Page 85 Fig. 1 T-case washer Drive gear Fig. 2 a.Ejecting state b.Open-lock state c.Clamp state with no disc loaded There is a There is space no space AVH-P2300DVD/XNUC...
  • Page 86 6.As in the Figures, while supporting the location A with your fingers, Fig. 6 screw the relay PCB. (Fig. 7 / Fig. 8) 7.Solder the lead for the CRG motor. 8.Fit the relay FFC to the connector. Fig. 7 Fig. 8 AVH-P2300DVD/XNUC...
  • Page 87 (Precaution) The relay FFC must be removed for certainty in order to prevent the IC damage. 2.Apply 1.5V to the CRG motor and then transfer the PU to the outer periphery. (Precaution) Do not forget to reinstall the relay FFC after sending the PU to the outer periphery and take the necessary measures. AVH-P2300DVD/XNUC...

  • Page 88: Each Setting And Adjustment

    Laser didoes may be damaged, if the volume switch for the minus side of the probe, the body frame of the the laser power adjustment of the pick up unit, is turned. measurement device should be set to floating ground. AVH-P2300DVD/XNUC...
  • Page 89 Oscilloscope Symptom in case the adjustment is not adequate: Worsening of the error rate 10 (Normally 10 or less.) Large RF jitter RF waveform distortion Tracking drawing/Unstable servo * Caution: Do not look into the laser light during adjustment. AVH-P2300DVD/XNUC...
  • Page 90 Next, slightly turn the skew adjusting screw B so the level would reach its maximum. Slightly turn the skew adjusting screw A again so the level would reach its maximum. (Make adjustment in the order of A->B->A and in the end complete adjustment by turning each screw in the clockwise direction.) AVH-P2300DVD/XNUC...
  • Page 91 5: CRG Move Outer 6: Eject Please Input Number 12. In order to produce the clamping state with no disc loaded, slightly move the disc detection arm in the counterclockwise direction while moving the switch arms outward. Switch arms AVH-P2300DVD/XNUC...
  • Page 92 1: Power OFF CRG Move Outer 1: Power OFF Please Input Number 15. TEST MODE Select “6: Eject.” TEST MODE 1: LD ON 2: ASMAX 3: Skew Adjustment 4: Error Rate 5: CRG Move Outer 6: Eject Please Input Number AVH-P2300DVD/XNUC...
  • Page 93 Locations to make SKEW adjustment Locations to adhere the SKEW 1,2,3: BOND QUICK MENDER AVH-P2300DVD/XNUC...
  • Page 94 Bond for resonance 4:Three Bond 1530 adhesive Bond for locking the screw 5,6 : Three Bond 1401M Bond for locking the screw AVH-P2300DVD/XNUC...
  • Page 95 Precautions on handling the PU *Precaution: Do not touch those shaded areas in the following figures. Hologram (Beware of the static) Do not touch the optical part RF level adjusting part Do not touch the spring AVH-P2300DVD/XNUC...

  • Page 96: Mother Pcb Adjustment

    8.2 MOTHER PCB ADJUSTMENT - Adjustment Point MOTHER PCB (SIDE A) MOTHER PCB (SIDE B) SYSB VDD33_O TUN5_a VCC33 ILMB PWRBL AVH-P2300DVD/XNUC...
  • Page 97 AVH-P2300DVD/XNUC...

  • Page 98: Monitor Pcb Adjustment

    8.3 MONITOR PCB ADJUSTMENT MONITOR PCB(SIDE B) - Adjustment Point PL34 RGBV TMP1 AVH-P2300DVD/XNUC...
  • Page 99 AVH-P2300DVD/XNUC...

  • Page 100: Pcl Output Confirmation

    TESTIN IC601(Pin 52) terminal to H. The clock signal is output from the CLKOUT terminal IC601(Pin 86). The frequency of the clock signal is 31.45728 MHz. If the clock signal out of the range, the X’tal (X601) should be replaced with new one. AVH-P2300DVD/XNUC...
  • Page 101 AVH-P2300DVD/XNUC...

  • Page 102: Exploded Views And Parts List

    Screw adjacent to mark on the product are used for disassembly. For the applying amount of lubricants or glue, follow the instructions in this manual. (In the case of no amount instructions,apply as you think it appropriate.) 9.1 PACKING AVH-P2300DVD/XNUC...
  • Page 103 12-5 Service network Card See Contrast table (2) Contain Box See Contrast table (2) Protector See Contrast table (2) (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/...

  • Page 104: Exterior (1)

    9.2 EXTERIOR (1) AVH-P2300DVD/XNUC...
  • Page 105 CNB3544 Seal See Contrast table (2) Holder CND4809 Heat Sink CNR2099 Screw See Contrast table (2) (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/ Mark Description XNUC...

  • Page 106: Exterior (2)

    9.3 EXTERIOR (2) AVH-P2300DVD/XNUC...
  • Page 107 Lighting Conductor CNW1773 Remote Control Unit CXE3877 Holder CNW1775 Cover CNU1624 Touch Panel CSX1169 (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/ Mark Description XNUC XNRC XNRD...

  • Page 108: Exterior (3)

    9.4 EXTERIOR (3) AVH-P2300DVD/XNUC...
  • Page 109 See Contrast table (2) Insulator CNN2764 Sheet See Contrast table (2) Service Unit(Mother Assy) See Contrast table (2) (2) CONTRAST TABLE AVH-P2300DVD/XNUC, AVH-2350DVD/XNRC, AVH-2350DVD/XNRD, AVH-2350DVD/RI are AVH-2390DVD/XNID constructed the same except for the following: AVH-P2300DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2350DVD/ AVH-2390DVD/ Mark...

  • Page 110: Dvd Mechanism Module

    ( A ) ( C ) ( A ) ( A ) ( C ) ( A ) ( C ) ( C ) ( C ) ( C ) (A) : GEM1045 (B) : GEM1038 (C) : GEM1024 AVH-P2300DVD/XNUC...
  • Page 111 Rack CNW1170 Guide CNW1171 Roller CNW1172 CNW2157 CNW1174 Roller CNW1175 Lever CNW1176 CNW1177 CNW1178 Gear CNW1180 Gear CNW1181 ••••• Gear CNW1183 Rack CNW1184 Gear CNW1185 Gear CNW1186 Gear CNW1187 Gear CNW1188 Clamper CNW1190 CNW1191 CNW1192 Holder CNW1193 Holder CNW1194 AVH-P2300DVD/XNUC...
  • Page 112 ( C ) ( C ) ( C ) ( C ) ( C ) ( C ) ( C ) ( A ) ( A ) ( A ) (A) : GEM1045 (B) : GEM1038 (C) : GEM1024 AVH-P2300DVD/XNUC...
  • Page 113 AVH-P2300DVD/XNUC...

  • Page 114: Mother Pcb (Analog Part)

    GNDV VDOUT2 LIN3 8.4V B.Cam VDSAG1 ARET3 RCA_V VDOUT1 RIN3 R312 AVCC AV SEL OUTPUT FM(30%): -15 dBs MONIT SYS+B AM(30%): -15 dBs 8.4V AUX:+2.2 dBs VCR:+2.2 dBs iPod(AUX):+1.3 dBs LS1:+5.1 dBs USB:+5.1 dBs GNDA GNDV CHIP ANALOG BUS AVH-P2300DVD/XNUC...
  • Page 115 No differentiation is made between chip resistors and MOTHER PCB 1608 discrete resistors. 2125 INTERFACE PCB 3216 Symbol indicates a capacitor. KEYBOARD PCB No differentiation is made between chip capacitors and MONITOR PCB NM : No Mount discrete capacitors. AVH-P2300DVD/XNUC...

  • Page 116: Mother Pcb (System Part) (Guide Page)

    100k RESET KDT1 KDT0 CN601 GNDD R639 ILMG GNDD AUXL AUX_L AUXAG AUX_AGND AUXR AUX_R AUXVG AUX_VGND AUXV AUX_V PWRBL REMIN R702 USBG VCC33 GNDD GNDILM GNDD CN701 VKN1612-A VCC33 PWRBL GNDV 3.4V CN3501 8.1V GNDD GNDBL CKS5 CN5601 AVH-P2300DVD/XNUC...
  • Page 117 SYS-ANA BUS Q753 R755 ADVX R754 ADVY SYS-PWR BUS R763 UMF5N C751 C752 0.047u/16 0.047u/16 GNDD GNDD COMBINED UNIT Consists of CHIP SIZE LEGEND MOTHER PCB PWRBL 1608 2125 INTERFACE PCB 8.1V 3216 KEYBOARD PCB MONITOR PCB CN801 CKS5708-A AVH-P2300DVD/XNUC...
  • Page 118 AVH-P2300DVD/XNUC...
  • Page 119 AVH-P2300DVD/XNUC...
  • Page 120 AVH-P2300DVD/XNUC...
  • Page 121 AVH-P2300DVD/XNUC...

  • Page 122: Mother Pcb (Power Supply Part)

    R1061 R1224 LS1 Mecha 8.1V M2R6 > C1215 *except UC PWRBL 0.047u/16 P1081 C1233 GNDD CEK1285-A *only UC PWRBL 0.047u/16 (2.5A) Fast acting fuse 8.1V > GNDDDC GNDD 8.1V PWRBL ILMB L1151 P1151 CEK1282-A (1.5A) Fast acting fuse GNDBL AVH-P2300DVD/XNUC...
  • Page 123 The > mark found on some component parts indicates CHIP SIZE LEGEND 1608 the importance of the safety factor of the part. 2125 Therefore, when replacing, be sure to use parts of 3216 : The power supply is shown with the marked box. identical designation. AVH-P2300DVD/XNUC...

  • Page 124: Mother Pcb (In/Out Part)

    CCG1192-A TUNDATA GNDRF C418 0.022u/16 L410 R403 GNDA 1.5k R414 R410 C416 L405 GNDA L406 CTF1389-A 0.01u/16 L408 R416 R409 R415 GNDD L411 CTF1786-A COMBINED UNIT Consists of GNDRF GNDRF GNDD MOTHER PCB INTERFACE PCB KEYBOARD PCB MONITOR PCB AVH-P2300DVD/XNUC...
  • Page 125 AVH-P2300DVD/XNUC...

  • Page 126: Interface Pcb

    C2507 DCH1201-A GNDSIG DCH1201-A ONSEI+ ONSEI- CN501 TVON GUIDEON R2508 SYSTONAVI R2514 NAVITOSYS R2515 BUSL- BUSL+ R2510 BUSR- R2509 BUSR+ ASENBO BUS+ R2513 BUS- R2512 GNDD GNDD WIREDAD WIRED JA2502 CKS4124-A R2504 WIREDAD WIRED WIRED R R2501 GNDD GNDD AVH-P2300DVD/XNUC...

  • Page 127: Keyboard Pcb

    BUSRG BUSL+ ASENBO R2521 R2520 BUSR+ R2519 BUSR- R2517 R2518 BUSL- R2516 IP BUS:+2.2 dBs (1 Vrms) *only UC WIRED REMOTE COMBINED UNIT CHIP SIZE LEGEND Consists of 1608 MOTHER PCB 2125 INTERFACE PCB 3216 KEYBOARD PCB MONITOR PCB AVH-P2300DVD/XNUC...

  • Page 128: Dvd Core Unit (Guide Page)

    LDIN LDIN TKO+ PGND R1204 TOP2 CRGDRV R1203 SLOPOUT CRGDRV TKO- 37 SLIN 3 FCIN PREVcc 2 TKIN C1207 PREGND VHALF VHALF SUBGND R1406 Vss1 Vss1 100K IC1201 PGND2 PGND1 BD8231EFV GNDD XCSF2 XCSF1 PGND CWW3501 CWW3500 R1409 GNDD AVH-P2300DVD/XNUC...
  • Page 129 TEMP R1217 TEMP R1300 DVDLD1 HALL_V+ <TC7SZ126FU> VCC33 IC1006 R1111 R1116 TEMP GND R1218 HALL_V- TOP1 HALL_U+ Q1103 2SB1132 HALL_U- LPCO1 Q1101 HALL_BIAS- X:Don’t Care FOP1 2SC4081 Z:High Impedance CRG/LE- CRG/LE+ GNDA PGND GNDD PU(DP10) GNDD GNDA MOTOR DRIVER AVH-P2300DVD/XNUC...
  • Page 130 AVH-P2300DVD/XNUC...
  • Page 131 CXX2398 PICKUP UNIT (SERVICE) AVH-P2300DVD/XNUC...
  • Page 132 AVH-P2300DVD/XNUC...
  • Page 133 AVH-P2300DVD/XNUC...

  • Page 134: Connect Pcb

    COIL U CSN1068-A COIL V CN1201 DSCSNS HALL W+ DSCSNS1 DSCSNS1_B DSCSNS0 DSCSNS0_B CSN1068-A HALL W- R103 HALL V+ S102 HALL V- HALL U+ HALL U- HALL BIAS- CRGP CRG+ CRGM LOAD/CRG MOTOR CRG- CXC4026 SPINDLE MOTOR EXM1050 CN101 AVH-P2300DVD/XNUC...
  • Page 135 AVH-P2300DVD/XNUC...

  • Page 136: Keyboard Pcb

    USDM USDP C3512 USBGND 4.7u/6.3 USBGND CN3502 YKS5032-A USB:+5.1 dBs (1.4 Vrms) ILMGND AUX_L AUX_R AUXGND CTF1389-A R3502 L3501 AUX_V JA3501 R3504 CKN1084-A R3505 AUXV AUXL AUXR L3502 CTF1389-A L3503 R3501 R3503 CTF1389-A AUX:+2.2 dBs (1 Vrm ILMGND ILMGND AVH-P2300DVD/XNUC...
  • Page 137 (1.4 Vrms) JA3501 CKN1084-A ILMGND AUXV AUXL AUXR COMBINED UNIT CHIP SIZE LEGEND AUX:+2.2 dBs (1 Vrms) PART REFERENCE LEGEND Consists of 1608 MOTHER PCB 3501 - : KEYBOARD SECTION 2125 INTERFACE PCB 3216 KEYBOARD PCB MONITOR PCB AVH-P2300DVD/XNUC...

  • Page 138: Monitor Pcb (Guide Page)

    11 V- GNDV GNDV 10 C_+IN B_+IN AVAGND 9 C_-IN B_-IN GNDBL 8 C_OUT B_OUT 4.7k GNDBL GNDBL GNDBL NJM2138V GNDD PWRBL PWRBL AVAGND PWRBL R5157 PWRBL BLERR1 BLERR1 BLCLK BLSYNC MBLPW GNDSIG MBLPW DMPL DIMPLS DIMMER TEMP1 TEMPSEN1 GRST AVH-P2300DVD/XNUC...
  • Page 139 CTF1545-A VDD5 TSTC0 VSS5 LCDICLK C5399 GPIO9 R5384 LCD0CLK LCDICLK 0.1u/10 NRST R5480 SHUT L5382 R5385 R5486 LCD0CLK CTF1748-A IC5480 R5484 GND0 OUTY GRST1 TC7SHU04FUS1 R5541 R5482 X5540 GNDD X5480 CSS1792-A CSS1787-A 9.597MHz 33MHz GNDD GNDD 1608 2125 3216 AVH-P2300DVD/XNUC...
  • Page 140 LCD AVH-P2300DVD/XNUC...
  • Page 141 LCD AVH-P2300DVD/XNUC...
  • Page 142 AVH-P2300DVD/XNUC...
  • Page 143 CN801 AVH-P2300DVD/XNUC...

  • Page 144: Waveforms

    DVDRF(BD1mm) Interval FWD(DVD) Interval REV(DVD) 2.2 V-> VHALF VHALF TD1 0.2 V/div 500 us/div TD1 0.2 V/div 500 us/div CH1:TD1 0.5 V/div 10 ms/div Multi 32FWD(DVD) Multi 32REV(DVD) CH2:COP-COM 2.0 V/div 10 ms/div Traverse 1001FWD(short)(DVD) VHALF VHALF VHALF 0-> AVH-P2300DVD/XNUC...
  • Page 145 Play TD (DVD) Focus Close (DVD) 0-> VHALF VHALF FD1 0.5 V/div 500 us/div FD1 0.5 V/div 500 us/div FD1 0.5 V/div 20 ms/div Play FD(DVD) Focus Jump L0 -> L1 Focus Jump L1 -> L0 VHALF VHALF VHALF AVH-P2300DVD/XNUC...

  • Page 146: Pcb Connection Diagram

    CN901 P1082 C1081 C1207 C1201 L1202 Q1202 D1202 CN1901 IC703 R707 R706 P1081 C705 L701 P1151 C710 R705 D702 C709 R703 R704 C1061 IC1061 C1062 C1063 CN3501 CN701 R1061 IC702 C711 C701 D701 C708 CN2501 C1152 C702 L1151 CN5601 AVH-P2300DVD/XNUC...
  • Page 147 R608 C811 C812 R610 R611 R678 R637 C611 R623 R662 R624 R613 C620 R677 R642 R646 IC602 C618 C601 C602 R603 R675 R676 R630 C619 L751 R761 Q753 Q752 BZ601 CN801 R754 R763 R755 R752 Q751 R753 CN601 FRONT AVH-P2300DVD/XNUC...
  • Page 148 C304 R311 C457 C458 C314 C323 TUN5_a C452 C451 R301 R304 R410 L1041 IC1041 C1045 R687 C1046 R658 R1042 R1041 R681 R631 R655 C610 C605 R645 R644 R605 C606 C607 R607 R612 R638 R640 R663 R643 R661 R651 R629 AVH-P2300DVD/XNUC...
  • Page 149 SYSB R307 C335 C1236 C337 R1043 C338 R312 C327 R311 R852 VDD33_O C323 R1204 R1203 C852 R1208 R1206 R1201 R1226 R1222 C1220 R1227 C1206 C1204 IC1201 C1235 C1208 C1210 C1231 C1228 R1211 VCC33 R708 R709 ILMB R702 C1151 PWRBL AVH-P2300DVD/XNUC...
  • Page 150 11.2 INTERFACE PCB INTERFACE PCB SIDE A CN501 R2510 R2509 R2513 R2512 AVH-P2300DVD/XNUC...
  • Page 151 INTERFACE PCB SIDE B D2501 D2503 C2513 C2512 D2512 D2509 D2508 D2507 D2510 R2506 R2505 D2511 C2507 C2511 C2506 C2508 R2503 R2514 R2515 R2502 C2501 AVH-P2300DVD/XNUC...

  • Page 152: Dvd Core Unit

    C1522 R1524 R1509 R1538 C1503 C1622 C1624 C1620 C1619 C1621 L1512 C1625 C1618 C1615 C1616 C1614 C1612 C1611 C1610 R1605 C1623 C1601 C1603 C1608 R1102 C1607 R1110 C1604 R1104 R1675 R1679 R1101 R1673 R1008 C1018 R1204 R1202 R1201 C1208 AVH-P2300DVD/XNUC...
  • Page 153 DVD CORE UNIT SIDE B C1950 C1486 C1485 R1489 C1407 C1493 C1408 C1480 C1490 C1301 AVH-P2300DVD/XNUC...
  • Page 154 11.4 CONNECT PCB CONNECT PCB SIDE A CN1201 CN701 LOAD/CRG MOTOR AVH-P2300DVD/XNUC...
  • Page 155 CONNECT PCB SIDE B SPINDLE MOTOR S101 HOME CN101 DSCSNS R102 S102 R101 C101 8SNS R103 S103 AVH-P2300DVD/XNUC...
  • Page 156 C3501 D3507 S3504 S3505 R3513 R3516 R3515 R3517 R3514 REVERSE FORWARD S3507 S3508 D3508 R3530 R3532 R3529 C3511 R3528 Q3502 SOURCE MUTE R3519 R3520 R3518 S3503 S3506 R3527 R3523 C3510 Q3501 R3524 R3525 MENU MODE S3509 S3510 CN3502 JA3501 AVH-P2300DVD/XNUC...
  • Page 157 KEYBOARD PCB SIDE B C3502 CN3501 R3507 C3512 CN701 D3506 D3503 R3505 C3508 C3506 R3504 L3501 R3502 L3502 R3503 L3503 R3501 AVH-P2300DVD/XNUC...

  • Page 158: Monitor Pcb

    D5701 L5380 R5703 R5704 C5382 Q5701 R5726 C5711 Q5700 R5727 R5718 C5713 C5700 L5700 C5714 R5707 IC5701 IC5700 Q5702 R5724 R5708 C5702 R5702 C5703 R5700 D5700 R5720 R5712 R5711 C5712 R5706 R5714 R5715 R5713 R5716 LCD(BACK LIGHT) C5705 CN5700 AVH-P2300DVD/XNUC...

  • Page 159: Touch Panel

    R5143 IC5140 C5100 R5142 C5172 R5102 R5144 R5382 R5104 IC5100 R5145 R5103 R5155 R5151 C5102 Q5141 R5147 R5149 L5141 C5171 R5100 L5119 L5118 C5120 C5119 R5119 C5118 R5118 CN5601 IC5118 Q5118 CN801 CN5280 C5283 TOUCH PANEL D5283 D5282 C5282 AVH-P2300DVD/XNUC...
  • Page 160 MONITOR PCB PL34 C5543 L5540 C5398 L5384 L5385 C5124 L5142 RGBV C5211 C5210 IC5210 R5112 R5114 AVH-P2300DVD/XNUC...
  • Page 161 SIDE B L5483 C5480 C5543 L5540 R5340 R5328 R5338 C5398 R5331 R5336 R5337 R5339 R5322 R5334 L5384 L5451 R5333 R5335 L5450 R5326 R5324 R5330 C5451 R5327 R5325 R5323 R5321 L5703 TMP1 AVH-P2300DVD/XNUC...

  • Page 162: Electrical Parts List

    IC 301 (A, 91, 111) IC NJM2068V Circuit Symbol and No. Part No. Circuit Symbol and No. Part No. IC 1061 (A,51,27) Regulator IC S-1172B34-E6 A:AVH-P2300DVD/XNUC IC 1201 (B,39,65) IC AN33012UA B:AVH-2350DVD/XNRC IC 3501 (A,9,91) IR RC REC Module PNJ4833M...
  • Page 163 L 5600 (A,88,79) Inductor CTF1786 L 152 (A,22,123) Chip Coil BTH1101 L 5700 (A,11,28) Inductor CTF1748 L 153 (A,11,120) Inductor CTF1547 L 5701 (A,5,40) Inductor CTF1545 L 401 (A,165,90) Chip Coil LCTAWR15J2520 L 5702 (A,18,39) Choke Coil 10 uH CTH1435 AVH-P2300DVD/XNUC...
  • Page 164 R 502 (A,70,98) RS1/16SS332J R 110 (A,143,116) RS1/16SS821J R 505 (A,117,72) (A) RS1/16SS101J R 506 (A,117,74) (A) RS1/16SS101J R 111 (A,141,116) RS1/16SS821J R 112 (A,149,116) RS1/16SS821J R 507 (A,118,70) (A) RS1/16SS102J R 113 (A,99,120) RS1/16SS102J R 509 (B,100,61) RS1/16SS471J AVH-P2300DVD/XNUC...
  • Page 165 R 2512 (A,34,10) RS1/16SS471J R 681 (B,129,47) RS1/16SS222J R 2513 (A,35,10) RS1/16SS471J R 2516 (B,116,10) (A) RS1/16SS102J R 682 (A,158,47) RS1/16SS223J R 2517 (B,116,12) (A) RS1/16SS181J R 683 (B,143,46) RS1/16SS103J R 684 (B,138,46) RS1/16SS104J R 2518 (B,116,11) (A) RS1/16SS223J AVH-P2300DVD/XNUC...
  • Page 166 R 5218 (A,117,78) RS1/10SR561J R 5702 (A,6,24) RS1/16SS273J R 5219 (A,119,77) RS1/10SR680J R 5703 (A,5,38) RS1/16SS473J R 5220 (A,123,75) RS1/16SS330J R 5704 (A,31,38) RS1/16SS3301F R 5221 (A,122,80) RS1/16SS101J R 5705 (A,8,32) RS1/16SS102J R 5222 (A,129,61) RS1/16SS562J R 5706 (A,29,22) RS1/16SS472J AVH-P2300DVD/XNUC...
  • Page 167 C 427 (A,143,78) CCSSCH820J50 C 211 (B,129,100) CKSQYB225K10 C 428 (A,145,73) 2.2 uF CCG1205 C 212 (B,121,101) 10 uF CCG1192 C 431 (A,147,66) CKSSYB104K10 C 213 (B,122,85) CKSRYB105K10 C 432 (A,149,67) CKSSYB104K10 C 214 (B,120,98) CKSRYB105K10 C 433 (A,150,67) CKSSYB104K10 AVH-P2300DVD/XNUC...
  • Page 168 C 1021 (A,9,107) CEVW101M16 C 1022 (B,16,91) CKSYB105K35 C 5122 (A,86,36) CKSSYB104K10 C 1044 (A,164,58) Capacitor CEVW221M10 C 5124 (B,81,44) 10 uF DCH1201 C 1045 (B,156,54) CKSQYB225K10 C 5140 (A,109,49) CCSSCH6R0D50 C 1046 (B,157,52) CKSRYB474K10 C 5141 (A,109,42) CCSSCH6R0D50 AVH-P2300DVD/XNUC...
  • Page 169 C 5487 (A,40,61) CKSSYB104K10 L 1512 (A,57,5) Inductor CTF1743 L 1902 (B,5,8) Inductor CTF1487 C 5488 (A,41,63) CKSSYB104K10 L 1903 (B,12,11) Inductor CTF1558 C 5489 (A,43,64) CKSSYB104K10 C 5490 (A,46,71) CKSSYB104K10 L 1904 (B,46,19) Inductor CTF1473 C 5491 (A,50,70) CKSSYB104K10 AVH-P2300DVD/XNUC...
  • Page 170 R 1488 (B,68,5) RAB4CQ560J R 1954 (A,35,17) RS1/16SS153J R 1489 (B,59,5) RS1/16SS560J R 1955 (A,40,14) RS1/16SS153J R 1490 (B,50,21) RS1/16SS560J R 1956 (A,40,18) RS1/16SS0R0J R 1501 (B,46,7) RS1/16SS122J R 1957 (A,40,15) RS1/16SS0R0J R 1503 (B,45,8) RS1/16SS105J R 1504 (B,45,13) RS1/16SS120J AVH-P2300DVD/XNUC...
  • Page 171 C 1934 (B,42,29) CCSRCH680J50 C 1505 (A,53,5) CKSSYB104K10 C 1950 (B,73,33) CKSSYB104K10 C 1506 (A,55,5) CKSSYB104K10 C 1951 (B,74,36) CCSSCH100D50 C 1507 (A,62,5) CKSSYB104K10 C 1952 (B,78,36) CCSSCH100D50 C 1508 (A,66,5) CKSSYB104K10 C 1954 (B,43,49) CCSRCH470J50 C 1509 (A,69,5) CKSSYB104K10 AVH-P2300DVD/XNUC...
  • Page 172 (B,51,37) Switch(HOME) CSN1068 S 102 (B,12,23) Switch(DSCSNS) CSN1068 S 103 (B,22,10) Switch(8SNS) CSN1068 R 101 (B,52,27) RS1/16S101J R 102 (B,15,29) RS1/16S101J R 103 (B,16,11) RS1/16S101J C 101 (B,51,23) CKSRYB104K50 Miscellaneous Parts List Pickup Unit(Service) CXX2398 Motor Unit(LOAD/CRG) CXC4026 Motor(SPINDLE) EXM1050 AVH-P2300DVD/XNUC...

This manual is also suitable for:

Avh-2390dvdAvh-2350dvd

Table of Contents